How to remove the ABS Control Module along with the Brake Actuator on Toyota Corolla?

Begin Brake Actuator with VSC removal by disconnecting the battery cable while removing both the front right tire and engine under cover from the right side. The 2ZR-FE engine needs users to uninstall its V-ribbed belt but the 2AZ-FE engine requires both V-ribbed belts to be removed. The generator assembly must be removed next from both engine types. Drain out the brake fluid and perform swift cleaning on painted surfaces where the fluid touched. Start by removing the 3 bolts fixing the radiator reserve tank subsassembly followed by disassembling the radiator grille protector, No. 4 engine under cover for the 2AZ-FE and front bumper assembly. Remove the assembly that houses windshield washer reservoirs by extracting both the bolt and disconnecting motor connections followed by hose divider then taking out 2 bolts combined with clamp. Remove the brake actuator with bracket by opening the lock lever while disconnecting the brake actuator connector yet carefully avoiding brake fluid entry into the connector. Use a union nut wrench (10 mm) to remove the 6 brake lines that connect to the actuator assembly by first removing its bolt and label the lines for future reinstallation. Finish the removal by taking out the two bolts, nut, and brake actuator assembly bracket and body from the vehicle without damaging the wires or brake lines while also not touching the connector to lift your brake actuator assembly. The completion of the operation requires removing three bolts that secure the brake actuator to the brake actuator bracket assembly.

How to install the ABS Control Module and traction actuator assembly on Toyota Corolla?

The ABS and traction actuator assembly should be mounted to the bracket with two nuts tightened to 6.0 Nm (61 kgf-cm, 53 in-lbf). The next step involves attaching the brake actuator with its bracket by placing two bolts and a nut and tightening them to 20 Nm (204 kgf-cm, 15 ft-lbf) until all bolts are tightened in the order from 1 to 3. Fasten the actuator connector correctly with its locking mechanism fully in position. Shut up and secure each brake tube to the actuator positions on the bracket using Special Service Tool: 09023-00101 with 15 Nm torque (155 kgf-cm, 11 ft-lbf). Complete the installation of windshield washer jar assembly and LH headlight assembly together with front bumper cover and radiator grille sub-assembly, front fender liner RH, and front wheel RH using a torque of 103 Nm (1,050 kgf-cm, 76 ft-lbf). Start by filling the reservoir with brake fluid before performing bleeding procedures on the master cylinder together with brake line and ABS and traction actuator assembly. Check reservoir fluid levels and inspect for brake fluid leaks. The actuator requires Techstream control for testing followed by calibration of the yaw rate sensor and readiness for fog light aim adjustment. The technician should complete fog light aim inspection and adjustment. The last step involves preparing the vehicle for headlight aiming assessment followed by necessary adjustment of both inspection and adjustment of the headlights.

OEM Toyota Corolla ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

44 ABS Control Modules found

View related parts
Toyota Corolla Control Module
Part Number: 89540-12190
$660.90 MSRP: $831.95
You Save: $171.05 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Computer Assembly, Skid; ABS Control Module; Computer Assembly, Skid Control
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995 Toyota Corolla | Base, DX, LE | 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L GAS
View related parts
Toyota Corolla Modulator Valve
Part Number: 44050-12G30
$955.89 MSRP: $1203.28
You Save: $247.39 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Control Module; ABS Control Unit
- Replaces: 44050-12E60
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2019-2022 Toyota Corolla | SE, SE Nightshade, XSE | 4 Cyl 2.0 L GAS
View related parts
Toyota Corolla Actuator
Part Number: 44050-12620
$752.95 MSRP: $947.82
You Save: $194.87 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Control Module
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2010 Toyota Corolla | Base, LE, S, XLE, XRS | 4 Cyl 1.8 L GAS, 4 Cyl 2.4 L GAS
View related parts
Toyota Corolla Modulator Valve
Part Number: 44050-12190
$1231.35 MSRP: $1550.03
You Save: $318.68 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Control Module; Actuator Assembly, ABS & Traction
- Manufacturer Note: W(VSC)
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2008 Toyota Corolla | CE, LE, S, XRS | 4 Cyl 1.8 L GAS
View related parts
Toyota Corolla ABS Control Unit
Part Number: 44050-12L20
$855.55 MSRP: $1076.97
You Save: $221.42 (21%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake
- Manufacturer Note: *614
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023 Toyota Corolla | SE, XSE | 4 Cyl 2.0 L GAS
View related parts
Toyota Corolla ABS Control Unit
Part Number: 44050-02M01
$819.00 MSRP: $1030.96
You Save: $211.96 (21%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake
- Manufacturer Note: ENGINE-M20A-FKS (DS20)
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023 Toyota Corolla | LE, SE, XSE | 4 Cyl 2.0 L GAS
View related parts
Toyota Corolla Modulator Valve
Part Number: 44050-12L10
$974.73 MSRP: $1226.99
You Save: $252.26 (21%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Control Unit
- Manufacturer Note: *614
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023 Toyota Corolla | LE, SE, XSE | 4 Cyl 2.0 L GAS
View related parts
Toyota Corolla ABS Control Unit
Part Number: 44050-12K81
$921.04 MSRP: $1159.42
You Save: $238.38 (21%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2024 Toyota Corolla | Nightshade, SE, XSE | 4 Cyl 2.0 L GAS
View related parts
Toyota Corolla Actuator
Part Number: 44050-02520
$1057.35 MSRP: $1331.00
You Save: $273.65 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Control Module
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2011 Toyota Corolla | Base, LE, S | 4 Cyl 1.8 L GAS
View related parts
Toyota Corolla Modulator Valve
Part Number: 44050-12D90
$736.26 MSRP: $926.82
You Save: $190.56 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Control Module; ABS Control Unit
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2020 Toyota Corolla | Hybrid LE | 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Corolla Modulator Valve
Part Number: 44050-02450
$919.69 MSRP: $1157.72
You Save: $238.03 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Control Module
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010 Toyota Corolla | XRS | 4 Cyl 2.4 L GAS
View related parts
Toyota Corolla ABS Control Unit
Part Number: 44050-12J31
$855.53 MSRP: $1076.95
You Save: $221.42 (21%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake
- Manufacturer Note: *614
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023 Toyota Corolla | Hybrid LE, Hybrid SE, Hybrid XLE, LE, SE, XSE | 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS
View related parts
Toyota Corolla Modulator Valve
Part Number: 44050-12J30
$855.53 MSRP: $1076.95
You Save: $221.42 (21%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Control Unit
- Manufacturer Note: *614
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023 Toyota Corolla | Hybrid LE, Hybrid SE, Hybrid XLE, LE, SE, XSE | 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS
View related parts
Toyota Corolla Modulator Valve
Part Number: 44050-02N00
$835.35 MSRP: $1051.54
You Save: $216.19 (21%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake
- Manufacturer Note: *614
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023 Toyota Corolla | LE, SE, XSE | 4 Cyl 2.0 L GAS
View related parts
Toyota Corolla Modulator Valve
Part Number: 44050-12G10
$754.54 MSRP: $949.82
You Save: $195.28 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Control Module; ABS Control Unit
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2020-2022 Toyota Corolla | Hybrid LE | 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Corolla Actuator
Part Number: 44050-12840
$1054.63 MSRP: $1327.58
You Save: $272.95 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Control Module
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2011 Toyota Corolla | Base, LE, S | 4 Cyl 1.8 L GAS
View related parts
Toyota Corolla Actuator
Part Number: 44050-12842
$992.32 MSRP: $1249.14
You Save: $256.82 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Control Module
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2012-2013 Toyota Corolla | L, LE, S | 4 Cyl 1.8 L GAS
View related parts
Toyota Corolla Modulator Valve
Part Number: 44050-02701
$965.65 MSRP: $1215.57
You Save: $249.92 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Control Module; Actuator
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2015 Toyota Corolla | L, LE, LE Eco, S | 4 Cyl 1.8 L GAS
View related parts
Toyota Corolla Modulator Valve
Part Number: 44050-12200
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Pump And Motor Assembly; ABS Control Module; Actuator Assembly; Actuator Assembly, ABS & Traction
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2008 Toyota Corolla | CE, LE, S | 4 Cyl 1.8 L GAS
View related parts
Toyota Corolla Actuator Assembly
Part Number: 44050-02140
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Modulator Valve; ABS Pump And Motor Assembly; ABS Control Module
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2006 Toyota Corolla | XRS | 4 Cyl 1.8 L GAS

| Page 1 of 3 |Next >

1-20 of 44 Results

Toyota Corolla ABS Control Module

Choose genuine ABS Control Module that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM ABS Control Module for your Toyota Corolla? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Corolla parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

The Toyota Corolla ABS Control Module is a part of the anti-lock braking system (ABS) of Toyota Corolla car models; it is known for its sturdiness and effectiveness. This module has the significant function to prevent enter the wheel lock up state while heavy braking condition to improve vehicle dynamics and safety. Through the help of a set of wheel speed sensors, valves, a pump and an ECU, the ABS Control Module always checks on the wheel speed and regulates the brake pressure for the optimal braking outcome. Throughout the years, the Toyota Corolla has experienced a number of designs of the ABS Control Module; it has had added features such as the Electronic Stability Control (ESC) and Traction Control, which help in controlling the car besides using individual wheel braking. This is the main reason because Toyota Corolla proved to be the most reliable and safest car among all competitors in the market. It fits most Corolla models and enhances the driving experience and as such makes the ABS Control Module a standout product in the market. And, as usual, ABS system decreases stopping distances on almost all types of roads but, at the same time, increases the distance needed to make an emergency stop on loose gravel or snow. In conclusion, the Toyota Corolla ABS Control Module highlights the kind of innovation and safety for which Toyota seeks to maintain in their cars that makes the Corolla one of the most popular cars in the market across the world. The ABS Control Module is a key component of the high technology and dependable performance that improves and saves every Toyota Corolla car on the road.

Toyota Corolla ABS Control Module Parts and Q&A

Modulator Valve
44050-02270
Q: How to remove the ABS Control Module along with the Brake Actuator on Toyota Corolla?
A:
Begin Brake Actuator with VSC removal by disconnecting the battery cable while removing both the front right tire and engine under cover from the right side. The 2ZR-FE engine needs users to uninstall its V-ribbed belt but the 2AZ-FE engine requires both V-ribbed belts to be removed. The generator assembly must be removed next from both engine types. Drain out the brake fluid and perform swift cleaning on painted surfaces where the fluid touched. Start by removing the 3 bolts fixing the radiator reserve tank subsassembly followed by disassembling the radiator grille protector, No. 4 engine under cover for the 2AZ-FE and front bumper assembly. Remove the assembly that houses windshield washer reservoirs by extracting both the bolt and disconnecting motor connections followed by hose divider then taking out 2 bolts combined with clamp. Remove the brake actuator with bracket by opening the lock lever while disconnecting the brake actuator connector yet carefully avoiding brake fluid entry into the connector. Use a union nut wrench (10 mm) to remove the 6 Brake Lines that connect to the actuator assembly by first removing its bolt and label the lines for future reinstallation. Finish the removal by taking out the two bolts, nut, and brake actuator assembly bracket and body from the vehicle without damaging the wires or brake lines while also not touching the connector to lift your brake actuator assembly. The completion of the operation requires removing three bolts that secure the brake actuator to the brake actuator bracket assembly.
Modulator Valve
44050-12190
Q: How to install the ABS Control Module and traction actuator assembly on Toyota Corolla?
A:
The ABS and traction actuator assembly should be mounted to the bracket with two nuts tightened to 6.0 Nm (61 kgf-cm, 53 in-lbf). The next step involves attaching the brake actuator with its bracket by placing two bolts and a nut and tightening them to 20 Nm (204 kgf-cm, 15 ft-lbf) until all bolts are tightened in the order from 1 to 3. Fasten the actuator connector correctly with its locking mechanism fully in position. Shut up and secure each brake tube to the actuator positions on the bracket using Special Service Tool: 09023-00101 with 15 Nm torque (155 kgf-cm, 11 ft-lbf). Complete the installation of windshield washer jar assembly and LH headlight assembly together with front bumper cover and radiator grille sub-assembly, front fender liner RH, and front wheel RH using a torque of 103 Nm (1,050 kgf-cm, 76 ft-lbf). Start by filling the reservoir with brake fluid before performing bleeding procedures on the master cylinder together with Brake Line and ABS and traction actuator assembly. Check reservoir fluid levels and inspect for brake fluid leaks. The actuator requires Techstream control for testing followed by calibration of the yaw rate sensor and readiness for fog light aim adjustment. The technician should complete fog light aim inspection and adjustment. The last step involves preparing the vehicle for headlight aiming assessment followed by necessary adjustment of both inspection and adjustment of the headlights.