How to install the Yaw Sensor and perform the necessary calibration on 2008 Toyota 4Runner?

The first step for installing the yaw rate sensor includes two bolt attachment with 13.3 Nm (136 kgf-cm, 10 ft-lbf) torque followed by yaw rate sensor connector connection. Begin by installing the console box assembly rear followed by the console upper panel garnish No. 2 which should be followed by the console upper panel garnish No. 1 before moving forward to install the console panel sub-assembly upper together with the console upper rear panel sub-assembly. Perform the yaw rate sensor zero point calibration and verify the speed sensor signal after finishing the installation.

OEM 2008 Toyota 4Runner Yaw Sensor

Yaw Rate Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Yaw Sensor found

View related parts
2008 Toyota 4Runner Yaw Rate Sensor
Part Number: 89180-35020
$535.71 MSRP: $785.08
You Save: $249.37 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Yawrate; Suspension Yaw Sensor; Yaw Sensor; Sensor, Yawrate
- Part Name Code: 89183A
- Item Weight: 1.40 Pounds
- Item Dimensions: 14.4 x 7.4 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89180-35020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota 4Runner Submodels:
- Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS

2008 Toyota 4Runner Yaw Sensor

Looking for affordable OEM 2008 Toyota 4Runner Yaw Sensor? Explore our comprehensive catalogue of genuine 2008 Toyota 4Runner Yaw Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota 4Runner Parts Questions & Experts Answers

Q: How to install the Yaw Sensor and perform the necessary calibration on 2008 Toyota 4Runner?
A: The first step for installing the yaw rate sensor includes two bolt attachment with 13.3 Nm (136 kgf-cm, 10 ft-lbf) torque followed by yaw rate sensor connector connection. Begin by installing the console box assembly rear followed by the console upper panel garnish No. 2 which should be followed by the console upper panel garnish No. 1 before moving forward to install the console panel sub-assembly upper together with the console upper rear panel sub-assembly. Perform the yaw rate sensor zero point calibration and verify the speed sensor signal after finishing the installation.