How to remove the drive belt on 2008 Scion xD?

Starting the drive belt removal process of the 2ZR-FE engine requires first taking off the engine under cover RH. The next step requires removal of the No. 2 cylinder head cover. The process requires bolt loosening through A and B while adjusting bolt C to decrease tension and allowing the fan and generator V belt to remove from the pulley zone. As the last step remove the fan and generator V belt from the system.

OEM 2008 Scion xD Drive Belt

Serpentine Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Drive Belt found

View related parts
2008 Scion xD Serpentine Belt
Part Number: 90916-02664
$32.13 MSRP: $44.73
You Save: $12.60 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt, V-Ribbed; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt, V(For Fan & Alternator)
- Replaces: 99366-K1230
- Part Name Code: 16361A
- Item Weight: 0.60 Pounds
- Item Dimensions: 10.5 x 2.8 x 0.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90916-02664
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Scion xD Submodels:
- Base | 4 Cyl 1.8 L GAS

2008 Scion xD Drive Belt

Looking for affordable OEM 2008 Scion xD Drive Belt? Explore our comprehensive catalogue of genuine 2008 Scion xD Drive Belt. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Scion xD Parts Questions & Experts Answers

Q: How to remove the drive belt on 2008 Scion xD?
A: Starting the drive belt removal process of the 2ZR-FE engine requires first taking off the engine under cover RH. The next step requires removal of the No. 2 cylinder head cover. The process requires bolt loosening through A and B while adjusting bolt C to decrease tension and allowing the fan and generator V belt to remove from the pulley zone. As the last step remove the fan and generator V belt from the system.