How to install the rear door Car Speakers assembly on the RH side on 2008 Scion xD?

When installing the rear door speaker assembly on the RH side, use an air riveter or hand riveter to mount the rear speaker by means of 3 new strike rivets based on the order presented in the illustration. Prevent damaging the rivets by not using the riveter to pry them and check that each rivet sits correctly on the speaker surface before confirming there is no speaker or panel tilt while installing. Every gap needs immediate removal between the speaker and door while holding both components firmly together during the installation of the rivet. Fasten the speaker before you can attach the connector. The installation process requires you to start by putting on the rear door trim board sub-assembly after that you should add the rear door inside handle bezel followed by the rear door armrest base upper panel.

OEM 2008 Scion xD Car Speakers

Audio Speakers

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Car Speakers found

View related parts
2008 Scion xD Door Speaker, Rear
Part Number: 86160-33620
$112.44 MSRP: $152.97
You Save: $40.53 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Speaker Assembly, Radio; Speaker, Center, Front, Rear; Quarter Panel Speaker; Front Driver Speaker; Rear Driver Speaker; Speaker Assembly, Front; Speaker Assembly, Rear
- Position: Rear
- Item Weight: 3.20 Pounds
- Item Dimensions: 12.6 x 12.1 x 8.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 86160-33620
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Scion xD Submodels:
- Base | 4 Cyl 1.8 L GAS
View related parts
2008 Scion xD Tweeter
Part Number: 86160-68010
$66.82 MSRP: $90.91
You Save: $24.09 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Speaker Assembly, Radio; Speaker; Speaker Assembly, Front
- Part Name Code: 86160P
- Item Weight: 0.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 86160-68010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Scion xD Submodels:
- Base | 4 Cyl 1.8 L GAS
View related parts
2008 Scion xD Quarter Panel Speaker, Rear
Part Number: 86160-13080
$108.89 MSRP: $148.14
You Save: $39.25 (27%)
Product Specifications
- Other Name: Speaker Assembly, Radio; Speaker, Rear; Rear Driver Speaker; Speaker Assembly, Rear
- Position: Rear
- Part Name Code: 86160B
- Item Weight: 1.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 86160-13080
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Scion xD Submodels:
- Base | 4 Cyl 1.8 L GAS

2008 Scion xD Car Speakers

Looking for affordable OEM 2008 Scion xD Car Speakers? Explore our comprehensive catalogue of genuine 2008 Scion xD Car Speakers. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Scion xD Car Speakers Parts Q&A

Q: How to install the rear door Car Speakers assembly on the RH side on 2008 Scion xD?
A: When installing the rear door speaker assembly on the RH side, use an air riveter or hand riveter to mount the rear speaker by means of 3 new strike rivets based on the order presented in the illustration. Prevent damaging the rivets by not using the riveter to pry them and check that each rivet sits correctly on the speaker surface before confirming there is no speaker or panel tilt while installing. Every gap needs immediate removal between the speaker and door while holding both components firmly together during the installation of the rivet. Fasten the speaker before you can attach the connector. The installation process requires you to start by putting on the rear door trim board sub-assembly after that you should add the rear door inside handle bezel followed by the rear door armrest base upper panel.