×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2008 Scion xB Clutch Master Cylinder
- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Clutch Master Cylinder found
2008 Scion xB Master Cylinder
Part Number: 31420-12030$113.51 MSRP: $159.33You Save: $45.82 (29%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Cylinder Assembly, Master; Clutch Master Cylinder; Brake Master Cylinder; Cylinder Assembly, Clutch Master
- Part Name Code: 31410
- Item Weight: 1.10 Pounds
- Item Dimensions: 10.1 x 5.6 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 31420-12030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2008 Scion xB Clutch Master Cylinder
Looking for affordable OEM 2008 Scion xB Clutch Master Cylinder? Explore our comprehensive catalogue of genuine 2008 Scion xB Clutch Master Cylinder. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2008 Scion xB Clutch Master Cylinder Parts Q&A
- Q: How to install the clutch master cylinder assembly on 2008 Scion xB?A: Begin installing the clutch master cylinder assembly by fixing it with both 13 Nm torque (129 kgf-cm, 9 in-lbf) nuts. Attach the clutch master cylinder to the flexible hose tube by tightening the union nut wrench to 15 Nm (154 kgf-cm, 11 ft-lbf) either with or without the wrench applied. The required torque is 14 Nm (143 kgf-cm, 10 ft-lbf) with using the wrench. The required torque can be reached through a 300 mm (11.8 in.) torque wrench combined with a 22 mm (0.886 in.) union nut wrench which should be set parallel to the torque wrench. Follow by fitting the clutch reservoir tube into the clutch master cylinder using the clip which must be attached without twisting the tube and with the white mark pointing upward. Before attaching the clevis to the clutch pedal using the pin and clip, apply MP grease on both pin and bush contact surfaces from the right side of the vehicle. After installing the clip to the pin users should proceed with brake booster assembly installation before conducting clutch pedal sub-assembly inspection and adjustment.