OEM 2008 Scion xB Clutch Slave Cylinder

2008 Scion xB Clutch Slave Cylinder Parts Q&A

• Q: How to install the Clutch Slave Cylinder assembly on 2008 Scion xB?

  A: The installation procedure for the clutch release cylinder assembly begins with securely bolting it through two screws to the specified torque value of 12 Nm (120 kgf-cm, 9 ft-lbf). The installation requires a connection of the clutch release cylinder to the flexible hose tube through union nut wrench where torque should be set to 14 Nm (143 kgf-cm, 10 ft-lbf) or by using a torque of 15 Nm (154 kgf-cm, 11 ft-lbf) when working without a union nut wrench. The torque values should be obtained by utilizing a torque wrench with 300 mm (11.8 in.) fulcrum length while using a union nut wrench with 22 mm (0.886 in.) fulcrum length which needs to remain parallel to the torque wrench for precise measurements. Install the clutch accumulator assembly as the last step.