Other Name: Speaker Assembly, Radio; Speaker, Front, Rear; Quarter Panel Speaker; Tweeter; Speaker Assembly, Front
Part Name Code: 86160P
Item Weight: 0.70 Pounds
Condition: New
Fitment Type: Direct Replacement
Require Quantity: 2
SKU: 86160-AE020
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2007 Toyota Sienna Submodels:
CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
2007 Toyota Sienna Car Speakers
Looking for affordable OEM 2007 Toyota Sienna Car Speakers? Explore our comprehensive catalogue of genuine 2007 Toyota Sienna Car Speakers. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2007 Toyota Sienna Car Speakers Parts Q&A
Q: How to remove and install the Front No. 1 Car Speakers on 2007 Toyota Sienna?
A: The procedure to remove the Front No. 1 Speaker begins with removing the front door lower frame bracket garnish followed by front door inside handle bezel plug replacement and proceeding with power window regulator master switch assembly removal along with front door armrest base panel assembly and front door trim board subassembly. The front No. 1 speaker assembly removal requires disconnection of its connector followed by screw removal until the assembly becomes free. Begin installation by installing the front No. 1 speaker assembly using four screws then connect the specified order and later connect the connector. Reinstall the above components in this sequence: the front door trim board subassembly followed by the front door armrest base panel assembly then the power window regulator master switch assembly and the front door inside handle bezel plug before installing the front door lower frame bracket garnish.