OEM 2007 Toyota Sequoia Throttle Body

2007 Toyota Sequoia Parts Questions & Experts Answers

• Q: How to service and repair the throttle body on 2007 Toyota Sequoia?

  A: Service and repair operations start with removing the throttle body cover followed by draining engine coolant then breaking the connection of the intake air connector. The service begins with disconnecting the throttle control connector and both water bypass hoses from the throttle body. Afterward, remove the nut and 3 bolts to separate the throttle body from the intake manifold. Position the throttle body after which you should attach it with the nut and 3 bolts while maintaining proper torque at 14 N.m (143 kgf.cm, 10 ft.lbf). After installing the intake air connector users should connect the 2 water bypass hoses followed by the throttle control connector. Verify coolant leakages after system filling with coolant engine startup and conclusion of throttle body cover replacement.