How to service the thermostat on 2007 Toyota Sequoia?

Service of the thermostat begins by draining the engine coolant first. You need to drain the engine coolant while you disconnect the water inlet from its housing by removing the existing 3 nuts. The following step requires the removal of the thermostat together with its gasket. The installation requires placing a new gasket on the thermostat before positioning it inside the water inlet housing so the jiggle valve points straight up while keeping in mind the valve can be set within 30 degrees of either side of the correct position. Install the water inlet with its 3 nuts then tighten them to 19 Nm (195 kgf-cm, 14 ft. lbs.). Complete system filling with engine coolant should be followed by engine startup and leak inspection and subsequent examination of engine coolant level.

OEM 2007 Toyota Sequoia Thermostat

Engine Coolant Thermostat

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Thermostats found

View related parts
2007 Toyota Sequoia Thermostat
Part Number: 90916-03138
$41.45 MSRP: $57.70
You Save: $16.25 (29%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Manufacturer Note: *WAX 82-95
- Part Name Code: 16331A
- Item Weight: 0.70 Pounds
- Item Dimensions: 2.6 x 2.6 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90916-03138
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2007 Toyota Sequoia Thermostat
Part Number: 90916-03100
$26.40 MSRP: $36.75
You Save: $10.35 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Coolant Thermostat
- Manufacturer Note: *WAX 82-95
- Part Name Code: 16331A
- Item Weight: 0.70 Pounds
- Item Dimensions: 2.8 x 2.7 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90916-03100
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS

2007 Toyota Sequoia Thermostat

Looking for affordable OEM 2007 Toyota Sequoia Thermostat? Explore our comprehensive catalogue of genuine 2007 Toyota Sequoia Thermostat. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2007 Toyota Sequoia Parts Questions & Experts Answers

Q: How to service the thermostat on 2007 Toyota Sequoia?
A: Service of the thermostat begins by draining the engine coolant first. You need to drain the engine coolant while you disconnect the water inlet from its housing by removing the existing 3 nuts. The following step requires the removal of the thermostat together with its gasket. The installation requires placing a new gasket on the thermostat before positioning it inside the water inlet housing so the jiggle valve points straight up while keeping in mind the valve can be set within 30 degrees of either side of the correct position. Install the water inlet with its 3 nuts then tighten them to 19 Nm (195 kgf-cm, 14 ft. lbs.). Complete system filling with engine coolant should be followed by engine startup and leak inspection and subsequent examination of engine coolant level.

Related 2007 Toyota Sequoia Parts

Alternate Year Models

2006 Toyota Sequoia Thermostat 2008 Toyota Sequoia Thermostat