How to service and repair the Ride Height Sensor on 2007 Toyota Sequoia?

To service the Ride Height Sensor, disconnect the connector and sensor link, marking positions before removing the nut with a torque of 5.4 N. m. Then, remove the rear height control sensor LH by disconnecting the wire harness and removing two bolts with a torque of 29 N. m. Reinstall in reverse order.

OEM 2007 Toyota Sequoia Ride Height Sensor

Suspension Level Hight Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ride Height Sensor found

View related parts
2007 Toyota Sequoia Level Sensor, Rear Driver Side
Part Number: 89408-34010
$450.02 MSRP: $659.50
You Save: $209.48 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Sub-Assembly, Height Control; Suspension Ride Height Sensor; Headlight Level Sensor; Sensor Sub-Assembly, Height Control, Rear Driver Side; Ride Height Sensor
- Position: Rear Driver Side
- Part Name Code: 89408D
- Item Weight: 0.90 Pounds
- Item Dimensions: 8.0 x 7.9 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89408-34010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS

2007 Toyota Sequoia Ride Height Sensor

Looking for affordable OEM 2007 Toyota Sequoia Ride Height Sensor? Explore our comprehensive catalogue of genuine 2007 Toyota Sequoia Ride Height Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2007 Toyota Sequoia Ride Height Sensor Parts Q&A

Q: How to service and repair the Ride Height Sensor on 2007 Toyota Sequoia?
A: To service the Ride Height Sensor, disconnect the connector and sensor link, marking positions before removing the nut with a torque of 5.4 N. m. Then, remove the rear height control sensor LH by disconnecting the wire harness and removing two bolts with a torque of 29 N. m. Reinstall in reverse order.