How to service and repair the Ride Height Sensor on 2006 Toyota Sequoia?

The procedure starts with disconnecting the height control sensor connector along with its link after marking corresponding points on link and bracket prior to disconnecting the sensor link nut at 5.4 Nm torque (55 kgf-cm, 48 inch lbs.). First disconnect the wire harness clamp then remove the two bolts holding the rear height control sensor LH while following the torque requirements of 29 Nm (300 kgf-cm, 21 ft. lbs.). Reverse procedure establishes the order for product installation.

OEM 2006 Toyota Sequoia Ride Height Sensor

Suspension Level Hight Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ride Height Sensor found

View related parts
2006 Toyota Sequoia Level Sensor, Rear Driver Side
Part Number: 89408-34010
$449.97 MSRP: $659.44
You Save: $209.47 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Sub-Assembly, Height Control; Suspension Ride Height Sensor; Headlight Level Sensor; Sensor Sub-Assembly, Height Control, Rear Driver Side; Ride Height Sensor
- Position: Rear Driver Side
- Part Name Code: 89408D
- Item Weight: 0.90 Pounds
- Item Dimensions: 8.0 x 7.9 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89408-34010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS

2006 Toyota Sequoia Ride Height Sensor

Looking for affordable OEM 2006 Toyota Sequoia Ride Height Sensor? Explore our comprehensive catalogue of genuine 2006 Toyota Sequoia Ride Height Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2006 Toyota Sequoia Parts Questions & Experts Answers

Q: How to service and repair the Ride Height Sensor on 2006 Toyota Sequoia?
A: The procedure starts with disconnecting the height control sensor connector along with its link after marking corresponding points on link and bracket prior to disconnecting the sensor link nut at 5.4 Nm torque (55 kgf-cm, 48 inch lbs.). First disconnect the wire harness clamp then remove the two bolts holding the rear height control sensor LH while following the torque requirements of 29 Nm (300 kgf-cm, 21 ft. lbs.). Reverse procedure establishes the order for product installation.