How to service the rear Ride Height Sensor on 2005 Toyota Sequoia?

In order to service the rear height control sensor, unplug the connector and sensor link and label their positions. Take off the nut and tighten the link to 5.4 Nm. After this disconnect the wire harness clamp and screwdriver out the two 29 Nm torqued bolts. Reinstall in reverse order.

OEM 2005 Toyota Sequoia Ride Height Sensor

Suspension Level Hight Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ride Height Sensor found

View related parts
2005 Toyota Sequoia Level Sensor, Rear Driver Side
Part Number: 89408-34010
$450.02 MSRP: $659.50
You Save: $209.48 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Sub-Assembly, Height Control; Suspension Ride Height Sensor; Headlight Level Sensor; Sensor Sub-Assembly, Height Control, Rear Driver Side; Ride Height Sensor
- Position: Rear Driver Side
- Part Name Code: 89408D
- Item Weight: 0.90 Pounds
- Item Dimensions: 8.0 x 7.9 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89408-34010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS

2005 Toyota Sequoia Ride Height Sensor

Looking for affordable OEM 2005 Toyota Sequoia Ride Height Sensor? Explore our comprehensive catalogue of genuine 2005 Toyota Sequoia Ride Height Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2005 Toyota Sequoia Ride Height Sensor Parts Q&A

Q: How to service the rear Ride Height Sensor on 2005 Toyota Sequoia?
A: In order to service the rear height control sensor, unplug the connector and sensor link and label their positions. Take off the nut and tighten the link to 5.4 Nm. After this disconnect the wire harness clamp and screwdriver out the two 29 Nm torqued bolts. Reinstall in reverse order.