OEM 2005 Toyota Sequoia Air Bag Control Module

2005 Toyota Sequoia Parts Questions & Experts Answers

• Q: How to service the Air Bag Control Module safely and effectively on 2005 Toyota Sequoia?

  A: A safe servicing process for the Air Bag Control Module begins with disconnecting the negative terminal cable from the battery and waiting 90 seconds to avoid Air Bag activation. The first step consists of removing the shifting hole cover together with upper console panel and rear console box and front console box. The holder along with connectors from the Air Bag sensor assembly must be disconnected before removing the four bolts that secure the assembly. Make sure to use a new Air Bag sensor assembly that comes from the vehicle model the replacement needs and was not involved in any previous car collision. Installation of a new assembly is required if the dropped component shows any damage or defects. When installing the SRS wiring make sure it stays away from all other components while avoiding points where it could be pinched. The Air Bag sensor assembly requires tightening with four torqued bolts to 17.5 N.m before reconnection of the sensor holder. Use the specifications to reinstall the front console box with the rear console box together with the upper console panel and shifting hole cover. After connecting the cable to the negative battery terminal the system must undergo initialization followed by a check of the SRS warning light to verify proper functionality.