How to service the rear Ride Height Sensor on Toyota Sequoia?

The first step for servicing the rear height control sensor starts with disconnecting its connector and link after marking these components for reference purposes before removing the nut holding the sensor link. Torque the sensor link to 5.4 Nm (55 kgf-cm, 48 inch lbs). Disconnecting the wire harness clamp leads to removing the two bolts which sustain the rear height control sensor. Apply torque to 29 Nm for both bolts during installation. To reinstall the components follow the opposite sequence compared to the disassembly process.

How to remove the rear Ride Height Sensor sub-assembly LH on Toyota Sequoia?

The first step to uninstall the rear height control sensor sub-assembly LH requires creating matchmarks between the rear height control sensor link and bracket. First disconnect the rear height control sensor link by removing its nut and then separate the connector. Disconnect the rear height control sensor connector as the next step of the procedure. Finally, remove the nut which then uncouples the rear height control sensor.

OEM Toyota Sequoia Ride Height Sensor

Suspension Level Hight Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Ride Height Sensors found

View related parts
Toyota Sequoia Position Sensor, Rear Driver Side
Part Number: 89408-34030
$360.01 MSRP: $527.59
You Save: $167.58 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Sub-Assembly, Height Control; Suspension Ride Height Sensor, Left; Height Sensor; Sensor Sub-Assembly, Height Control, Rear Driver Side; Ride Height Sensor
- Manufacturer Note: REAR SUSPENSION-AIR SUSPENSION
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2022 Toyota Sequoia | Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Level Sensor, Rear Driver Side
Part Number: 89408-34010
$450.02 MSRP: $659.50
You Save: $209.48 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Sub-Assembly, Height Control; Suspension Ride Height Sensor; Headlight Level Sensor; Sensor Sub-Assembly, Height Control, Rear Driver Side; Ride Height Sensor
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2007 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota Sequoia Level Sensor, Rear Driver Side
Part Number: 89408-0C010
$363.08 MSRP: $532.09
You Save: $169.01 (32%)
ADD TO CART
Product Specifications
- Other Name: Sensor Sub-Assembly, Height Control; Headlight Level Sensor, Front Left; Height Sensor; Sensor Sub-Assembly, Height Control, Rear Driver Side
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023-2024 Toyota Sequoia | Capstone, Limited, Platinum, SR5, TRD Pro | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Sequoia Position Sensor, Rear Passenger Side
Part Number: 89407-34020
$360.01 MSRP: $527.59
You Save: $167.58 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Sub-Assembly, Height Control; Suspension Ride Height Sensor, Right; Height Sensor; Sensor Sub-Assembly, Height Control, Rear Passenger Side; Ride Height Sensor
- Manufacturer Note: REAR SUSPENSION-AIR SUSPENSION
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2022 Toyota Sequoia | Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Level Sensor, Rear Passenger Side
Part Number: 89407-0C010
$363.08 MSRP: $532.09
You Save: $169.01 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Sub-Assembly, Height Control; Headlight Level Sensor, Front Right; Height Sensor; Sensor Sub-Assembly, Height Control, Rear Passenger Side
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023-2024 Toyota Sequoia | Capstone, Limited, Platinum, SR5, TRD Pro | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV)

Toyota Sequoia Ride Height Sensor

Choose genuine Ride Height Sensor that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Ride Height Sensor for your Toyota Sequoia? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Sequoia parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

Toyota Sequoia Ride Height Sensor Parts and Q&A

Level Sensor, Rear Driver Side
89408-34010
Q: How to service the rear Ride Height Sensor on Toyota Sequoia?
A:
The first step for servicing the rear height control sensor starts with disconnecting its connector and link after marking these components for reference purposes before removing the nut holding the sensor link. Torque the sensor link to 5.4 Nm (55 kgf-cm, 48 inch lbs). Disconnecting the wire harness clamp leads to removing the two bolts which sustain the rear height control sensor. Apply torque to 29 Nm for both bolts during installation. To reinstall the components follow the opposite sequence compared to the disassembly process.
Position Sensor, Rear Driver Side
89408-34030
Q: How to remove the rear Ride Height Sensor sub-assembly LH on Toyota Sequoia?
A:
The first step to uninstall the rear height control sensor sub-assembly LH requires creating matchmarks between the rear height control sensor link and bracket. First disconnect the rear height control sensor link by removing its nut and then separate the connector. Disconnect the rear height control sensor connector as the next step of the procedure. Finally, remove the nut which then uncouples the rear height control sensor.