Other Name: Emblem, Back Door; Hatch Emblem, Rear; Door Emblem, Rear; Nameplate
Manufacturer Note: RAV4
Position: Rear
Replaces: 75431-42020, 75431-42150, 75431-42030
Part Name Code: 75431A
Item Weight: 0.80 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: 75431-0R060
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2007 Toyota RAV4 Submodels:
Adventure, Base, Hybrid Limited, Hybrid SE, Hybrid XLE, L, LE, Limited, Platinum, SE, Sport, XLE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
Other Name: Plate, Back Door Name; Door Emblem, Rear
Position: Rear
Part Name Code: 75441C
Item Weight: 0.50 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: 75441-42050
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2007 Toyota RAV4 Submodels:
Base, Limited, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
2007 Toyota RAV4 Emblem
Looking for affordable OEM 2007 Toyota RAV4 Emblem? Explore our comprehensive catalogue of genuine 2007 Toyota RAV4 Emblem. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2007 Toyota RAV4 Parts Questions & Experts Answers
Q: How to remove and install the No.1 back door emblem assembly and name plate on 2007 Toyota RAV4?
A: The first step to remove the No.1 back door emblem assembly requires applying protective tape around the emblem before using a piano wire between emblem and vehicle body to create handles with wooden blocks. Recognize both the emblem and body of the vehicle while pulling the piano wire to peel the double-sided tape from its mount point. The back door name plate detachment requires use of protective tape followed by piano wire implementation to pull off the double-sided tape without harming vehicle body or name plate materials. The procedure to handle all 4WD back door Namplates using No.4 remains identical. After cleaning the vehicle body you must heat the surface using a heat light before removing adhesive residue and double-sided tape. The name plate or emblem requires cleaning with the procedure for new double-sided tape application. A preheating process must cover the vehicle body and name plate and emblem until the peeling paper removal reveals clean adhesive surfaces before finally installing them according to official procedures.