Other Name: Speaker Assembly, Radio; Speaker, Front; Speaker Assembly, Stereo Component, Front
Position: Front
Part Name Code: 86160D
Item Weight: 1.70 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: 86160-0WF80
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2007 Toyota Prius Submodels:
Base, Touring | 4 Cyl 1.5 L FULL HYBRID EV-GAS (FHEV)
2007 Toyota Prius Car Speakers
Looking for affordable OEM 2007 Toyota Prius Car Speakers? Explore our comprehensive catalogue of genuine 2007 Toyota Prius Car Speakers. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2007 Toyota Prius Parts Questions & Experts Answers
Q: How to remove and install the Front No. 1 Car Speakers on 2007 Toyota Prius?
A: A proper method to remove the Front No. 1 Speaker demands a 90-second wait after disconnecting the negative cable from the battery combined with not activating Air Bag or seat belt pretensioners. The first step is to uninstall the components including Front Door Lower Frame Bracket Garnish LH and Front Door Inside Handle Bezel LH and Door Pull Handle combined with Front Armrest Base Panel Upper LH and Front Door Trim Board Sub-Assembly LH. Drill three rivet heads on the Front No. 1 Speaker by using a drill tool smaller than 4 mm (0.16 in.) in diameter while maintaining straight drilling to prevent any mishaps. Take caution when pushing out any remaining rivet pieces after which you should vacuum and clean all debris from inside the door using a vacuum cleaner. The Front No. 1 Speaker Assembly installation requires an air or hand riveter using three new rivets to be seated correctly against the speaker both tightly and allowing no gaps. Begin by connecting the connector before reattaching the Front Door Trim Board Sub-Assembly LH together with Front Armrest Base Panel Upper LH, Door Pull Handle, Front Door Inside Handle Bezel LH and Front Door Lower Frame Bracket Garnish LH. Before reinstalling the vehicle cable you need to do initialization which some systems require after disconnecting and reconnecting it.