Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2016-2022 Toyota Prius | 2020 Edition, Four, Four Touring, L Eco, LE, Limited, One, Three, Three Touring, Two, Two Eco, XLE | 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV)
Other Name: Speaker Assembly, With Bracket; Speaker, Front, Rear Lower; Rear Driver Speaker; Speaker Assembly, Front
Position: Lower
Replaces: 86160-0WV60
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2012-2015 Toyota Prius | Five, Four, One, Persona Series, Three, Two | 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV)
| Page 1 of 3 |Next >
1-20 of 45 Results
Toyota Prius Car Speakers
Choose genuine Car Speakers that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Car Speakers for your Toyota Prius? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Prius parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.
Q: How to install the front door Car Speakers on the LH side on Toyota Prius?
A:
Downstream installation of front door speakers requires using an air riveter or hand riveter with three new rivets to attach front No.1 speaker assembly. The rivet placement should follow the correct sequence described in associated illustrations. The riveter should be used with caution to avoid damaging the rivet and drivers must check that speakers sit properly without allowing gaps to appear between the rivets and speakers or between the speaker and door while maintaining tight pressure on both pieces during the rivet installation. Next, connect the connector. Install the front door trim board sub-assembly LH and front armrest base panel upper LH together with the door pull handle and front door inside handle bezel LH. The installation sequence ends with the front No. 2 speaker assembly where operators must start by attaching the 3 claws before fixing the front door lower frame bracket garnish LH.
Q: How to remove the front door Car Speakers on the LH side on Toyota Prius?
A:
The first step to access the front door speaker on the LH side involves removing the front door lower frame bracket garnish LH. The removal of front NO. 2 speaker assembly requires the detachment of three claws which must be unfastened first. Following the front door inside handle bezel LH removal you must remove the door pull handle after which you can remove the front armrest base panel upper LH. The technician should remove the front door trim board sub-assembly LH after executing the prior steps. Webasto recommends the following approach for front NO. 1 speaker assembly removal: disconnect the connector then drill 3 rivets with a drill smaller than 4 mm (0.16 in.) in diameter yet still aligned with each rivet to prevent damage. Handle the cut rivet with caution for it will be extremely hot while maintaining drilling until all remaining rivet fragments are removed. A vacuum cleaner should be used to remove small pieces and fragments of rivets which remain inside the door.