Other Name: Unit Sub-Assembly, Radiator; Heater Core
Position: Front
Part Name Code: 87107
Item Weight: 2.60 Pounds
Item Dimensions: 13.5 x 11.7 x 8.8 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 87107-60351
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2007 Toyota Land Cruiser Submodels:
Base | 8 Cyl 4.7 L GAS
2007 Toyota Land Cruiser Heater Core
Looking for affordable OEM 2007 Toyota Land Cruiser Heater Core? Explore our comprehensive catalogue of genuine 2007 Toyota Land Cruiser Heater Core. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2007 Toyota Land Cruiser Parts Questions & Experts Answers
Q: How to remove and replace the Front Heater Core on 2007 Toyota Land Cruiser?
A: The installation procedure for a Front Heater Unit begins with disconnecting the battery cable from the negative terminal and waiting 90 seconds to avert Air Bag pretensioner and seat belt activators. You must detach the water hoses from the heater radiator pipes through plier use to slide the clip while collecting the engine coolant in a container. Install the water hose by pushing it onto the heater radiator pipes to the second bracket and afterward fasten it with clips according to the illustration. To extract the heater unit start by detaching its connector then removing 4 nuts followed by removal of the instrument panel safety pad subassembly and the instrument panel reinforcement assembly and front cooling unit and lower defroster nozzle. The heater unit installation requires users to fasten it with 4 nuts followed by reconnecting the connector and outfitting the lower defroster nozzle before adding the front cooling unit and instrument panel and reinforcement. Establish the water hose connection to heater radiator pipes by securing the clips properly onto them to reach the second ridge of pipe surfaces. After attaching the cable to the negative battery terminal the procedure demands system initialization before checking SRS warning light and implementing engine coolant addition then warming up the engine followed by leak inspection of engine coolant.