OEM 2007 Toyota Corolla Yaw Sensor

2007 Toyota Corolla Parts Questions & Experts Answers

• Q: How to service the Yaw Sensor on 2007 Toyota Corolla?

  A: Service of the yaw rate sensor begins with front seat assembly LH removal then moving to the yaw rate and acceleration sensor bracket using bolt removal. The service of the yaw rate sensor begins with unfastening the connector and removing two bolts that secure the assembly while keeping the installation nuts in place. Place the yaw rate and acceleration sensor assembly on its mounting points using two bolts which should be tightened to 21 N.m (214 kgf.cm, 15 ft.lbf) before reattaching the connector. All installation processes demand either new or undamaged yaw rate and acceleration sensors while avoiding any foreign material accumulation which could affix itself between this sensor bracket and the vehicle body. Fasten the sensor bracket to the bolt for installation with proper torque of 21 N.m (214 kgf.cm, 15 ft.lbf). The last step is to reinstall the front seat assembly LH while performing the yaw rate sensor zero point calibration.