How to install a Yaw Sensor assembly on 2008 Toyota Corolla?

Secure the yaw rate and acceleration sensor assembly by applying 2 bolts with proper torque coming to 21 Nm (214 kgf-cm, 15 ft-lbf). Attach the connector to the assembly while ensuring that no dropped or damaged sensor is used and avoiding foreign matter between the sensor bracket and body. You should install the yaw rate and acceleration sensor bracket with a bolt that requires a torque of 21 Nm (214 kgf-cm, 15 ft-lbf). The front seat assembly LH needs installation as the last step. Conduct the yaw rate sensor zero point calibration as the last step.

OEM 2008 Toyota Corolla Yaw Sensor

Yaw Rate Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Yaw Sensor found

View related parts
2008 Toyota Corolla Yaw Rate Sensor
Part Number: 89180-12020
Product Specifications
- Other Name: Sensor Assembly, Yawrate; ABS Deceleration Sensor Bracket; Suspension Yaw Sensor; Yaw Sensor; Decel Sensor Bracket
- Part Name Code: 89180
- Item Weight: 0.70 Pounds
- Item Dimensions: 5.3 x 4.1 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89180-12020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Corolla Submodels:
- CE, LE, S | 4 Cyl 1.8 L GAS

2008 Toyota Corolla Yaw Sensor

Looking for affordable OEM 2008 Toyota Corolla Yaw Sensor? Explore our comprehensive catalogue of genuine 2008 Toyota Corolla Yaw Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Corolla Parts Questions & Experts Answers

Q: How to install a Yaw Sensor assembly on 2008 Toyota Corolla?
A: Secure the yaw rate and acceleration sensor assembly by applying 2 bolts with proper torque coming to 21 Nm (214 kgf-cm, 15 ft-lbf). Attach the connector to the assembly while ensuring that no dropped or damaged sensor is used and avoiding foreign matter between the sensor bracket and body. You should install the yaw rate and acceleration sensor bracket with a bolt that requires a torque of 21 Nm (214 kgf-cm, 15 ft-lbf). The front seat assembly LH needs installation as the last step. Conduct the yaw rate sensor zero point calibration as the last step.