How to service and repair the wheel speed sensor on 2007 Toyota Corolla?

Service and repair operations of the wheel speed sensor begin by taking out the rear wheel after removing the rear brake drum sub-assembly for TMMC and TMC made drum types. Disconnect the skid control sensor wire through removing its connector from the sensor. Proceed by removing first the left-hand side rear axle hub and bearing assembly and then extract the skid control sensor by mounting the rear axle hub into a soft jaw vise. The axle hub assembly must receive replacement after any situation where it experiences a drop or strong impact. A pin punch and hammer should be used to extract the two pins followed by the removal of two attachments using Specific Tools including 09520-00031 (09520-00040), 09521-00020, 09950-00020 and two 12 mm diameter 1.5 mm pitch bolts. A new axle hub assembly must be used when the sensor rotor shows damage and technicians must avoid scratching the axle hub's contacting surface where it meets the speed sensor. To install the sensor clean both the axle hub contacting surface and the new speed sensor carefully while avoiding the attachment of foreign material to the sensor rotor. To install the speed sensor on the axle hub position it with the connector at its lowest point on the vehicle using Special Service Tool: 09214-76011 along with a press. The left-hand rear axle hub and bearing assembly must be returned to its original position and the skid control sensor wire should be reconnected while both TMMC and TMC made drum types require reinstallation of their respective brake drum sub-assemblies. Install the rear wheel after tightening it to 103 N.m (1,050 kgf.cm, 76 ft.lbf) while checking the ABS speed sensor signal for complete functionality alongside ABS and VSC systems.

OEM 2007 Toyota Corolla Speed Sensor

Speed Control Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Speed Sensors found

View related parts
2007 Toyota Corolla ABS Sensor, Rear
Part Number: 89544-02020
$222.39 MSRP: $272.73
You Save: $50.34 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Skid Control; ABS Wheel Speed Sensor, Rear Left, Rear Right; ABS Ring; Rear Speed Sensor; ABS Wheel Speed Sensor
- Position: Rear
- Part Name Code: 89544
- Item Weight: 0.80 Pounds
- Item Dimensions: 3.2 x 2.9 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 89544-02020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Corolla Submodels:
- CE, LE, S, XRS | 4 Cyl 1.8 L GAS
View related parts
2007 Toyota Corolla ABS Sensor, Front Driver Side
Part Number: 89543-02050
$279.82 MSRP: $399.52
You Save: $119.70 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Speed, Front Left-Hand; ABS Wheel Speed Sensor, Front Left; Front Speed Sensor; Sensor, Speed, Front Driver Side; ABS Wheel Speed Sensor
- Position: Front Driver Side
- Part Name Code: 89543
- Item Weight: 0.90 Pounds
- Item Dimensions: 10.4 x 6.5 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89543-02050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Corolla Submodels:
- CE, LE, S, XRS | 4 Cyl 1.8 L GAS
View related parts
2007 Toyota Corolla Sensor, Speedometer
Part Number: 83181-12020
$272.25 MSRP: $388.71
You Save: $116.46 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Vehicle Speed Sensor
- Replaces: 83181-12070
- Item Weight: 0.80 Pounds
- Item Dimensions: 6.1 x 3.9 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 83181-12020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Corolla Submodels:
- Base, CE, DX, LE, S, VE, XRS | 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L GAS
View related parts
2007 Toyota Corolla ABS Sensor, Front Driver Side
Part Number: 89543-12070
$263.74 MSRP: $376.57
You Save: $112.83 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Speed, Front Left-Hand; ABS Wheel Speed Sensor, Front Left; Sensor, Wheel Speed; Front Speed Sensor; Sensor, Speed, Front Driver Side; ABS Wheel Speed Sensor
- Position: Front Driver Side
- Part Name Code: 89543
- Item Weight: 0.80 Pounds
- Item Dimensions: 7.3 x 5.7 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89543-12070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Corolla Submodels:
- CE, LE, S, XRS | 4 Cyl 1.8 L GAS
View related parts
2007 Toyota Corolla ABS Sensor, Front Passenger Side
Part Number: 89542-02050
$279.82 MSRP: $399.52
You Save: $119.70 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Speed, Front Right-Hand; ABS Wheel Speed Sensor, Front Right; Front Speed Sensor; Sensor, Speed, Front Passenger Side; ABS Wheel Speed Sensor
- Position: Front Passenger Side
- Part Name Code: 89542
- Item Weight: 0.90 Pounds
- Item Dimensions: 10.3 x 6.5 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89542-02050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Corolla Submodels:
- CE, LE, S, XRS | 4 Cyl 1.8 L GAS
View related parts
2007 Toyota Corolla ABS Sensor, Front Passenger Side
Part Number: 89542-12070
$271.20 MSRP: $387.22
You Save: $116.02 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Speed, Front Right-Hand; ABS Wheel Speed Sensor, Front Right; Sensor, Wheel Speed; Front Speed Sensor; Sensor, Speed, Front Passenger Side; ABS Wheel Speed Sensor
- Position: Front Passenger Side
- Part Name Code: 89542
- Item Weight: 0.80 Pounds
- Item Dimensions: 7.1 x 5.9 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89542-12070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Corolla Submodels:
- CE, LE, S, XRS | 4 Cyl 1.8 L GAS

2007 Toyota Corolla Speed Sensor

Looking for affordable OEM 2007 Toyota Corolla Speed Sensor? Explore our comprehensive catalogue of genuine 2007 Toyota Corolla Speed Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2007 Toyota Corolla Speed Sensor Parts Q&A

Q: How to service and repair the wheel speed sensor on 2007 Toyota Corolla?
A: Service and repair operations of the wheel speed sensor begin by taking out the rear wheel after removing the rear brake drum sub-assembly for TMMC and TMC made drum types. Disconnect the skid control sensor wire through removing its connector from the sensor. Proceed by removing first the left-hand side rear axle hub and bearing assembly and then extract the skid control sensor by mounting the rear axle hub into a soft jaw vise. The axle hub assembly must receive replacement after any situation where it experiences a drop or strong impact. A pin punch and hammer should be used to extract the two pins followed by the removal of two attachments using Specific Tools including 09520-00031 (09520-00040), 09521-00020, 09950-00020 and two 12 mm diameter 1.5 mm pitch bolts. A new axle hub assembly must be used when the sensor rotor shows damage and technicians must avoid scratching the axle hub's contacting surface where it meets the speed sensor. To install the sensor clean both the axle hub contacting surface and the new speed sensor carefully while avoiding the attachment of foreign material to the sensor rotor. To install the speed sensor on the axle hub position it with the connector at its lowest point on the vehicle using Special Service Tool: 09214-76011 along with a press. The left-hand rear axle hub and bearing assembly must be returned to its original position and the skid control sensor wire should be reconnected while both TMMC and TMC made drum types require reinstallation of their respective brake drum sub-assemblies. Install the rear wheel after tightening it to 103 N.m (1,050 kgf.cm, 76 ft.lbf) while checking the ABS speed sensor signal for complete functionality alongside ABS and VSC systems.