Other Name: Sensor, Speed, Front Left-Hand; ABS Wheel Speed Sensor, Front Left; Front Speed Sensor; Sensor, Speed, Front Driver Side; ABS Wheel Speed Sensor
Position: Front Driver Side
Part Name Code: 89543
Item Weight: 0.90 Pounds
Item Dimensions: 10.0 x 6.7 x 2.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 89543-20170
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Other Name: Sensor, Speed, Front Right-Hand; ABS Wheel Speed Sensor, Front Right; Front Speed Sensor; Sensor, Speed, Front Passenger Side; ABS Wheel Speed Sensor
Position: Front Passenger Side
Part Name Code: 89542
Item Weight: 0.90 Pounds
Item Dimensions: 10.0 x 6.6 x 2.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 89542-20170
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2007 Scion tC Submodels:
Base, Spec | 4 Cyl 2.4 L GAS
2007 Scion tC Speed Sensor
Looking for affordable OEM 2007 Scion tC Speed Sensor? Explore our comprehensive catalogue of genuine 2007 Scion tC Speed Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2007 Scion tC Parts Questions & Experts Answers
Q: How to service and repair the front wheel speed sensor on 2007 Scion tC?
A: The process for repairing or servicing the front wheel speed sensor begins with battery cable disconnection from the negative terminal and at least a 90-second wait to avoid activating Air Bags and seat belt pretensioners. First disconnect the wheel and the fender liner which sits on the front left side of the vehicle. You must first remove the front speed sensor by detaching both its clamp then disconnecting its connector before you can remove its body bolts to separate the sensor from the body. Next remove the sensor from its housing. Before installation verify that the sensor tip exhibits no foreign substrates inside the installation hole. Position the speed sensor with bolt A on the body first while applying 9.0 N.m (92 kgf.cm, 80 in.lbf) torque then secure it using bolt A (9.0 N.m) and bolt B (29 N.m). Then reconnect the connector before proceeding with clamp installation followed by torqueing the front wheel and fender liner to 103 N.m (1,050 kgf.cm, 76 ft.lbf). The final step is to reconnect the cable to the negative terminal of the battery then run initialization programs because some systems demand these after separation and verify the ABS speed sensor signal.