How to remove and install the No. 5 back door Emblem on 2007 Scion tC?

A procedure must be followed when removing the No. 5 back door name plate starting with protective tape application around it while placing piano wire between the vehicle body and plate. Pull the piano wire after attaching wood blocks to its ends to scrape away double-sided tape holding the vehicle body to the name plate without causing damage to either component. The vehicle body requires cleaning with the help of a heat light, and then technicians need to remove double-sided tape while cleaning off any adhesive residue with a cleaning agent. To reuse the name plate first heat it under a heat light while removing old tape and cleaning any residue off before adding new double-sided tape. Warm both the name plate and vehicle body surface again before taking off the peeling paper from the name plate front side. After removing the foreign materials from exposed adhesive, install the name plate to match its specified orientation.

OEM 2007 Scion tC Emblem

Badge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Emblems found

View related parts
2007 Scion tC Emblem
Part Number: 75311-21100
$38.54 MSRP: $53.64
You Save: $15.10 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, Radiator Grille; Grille Emblem, Front; Emblem, Radiator Grille (Or Front Panel)
- Part Name Code: 75311
- Item Weight: 0.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 75311-21100
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Scion tC Submodels:
- Base, Spec | 4 Cyl 2.4 L GAS
View related parts
2007 Scion tC Nameplate, Rear
Part Number: 75445-21080
$29.39 MSRP: $40.90
You Save: $11.51 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, Back Door Name; Hatch Emblem, Rear
- Manufacturer Note: TC
- Position: Rear
- Part Name Code: 75445A
- Item Weight: 0.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 75445-21080
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Scion tC Submodels:
- Base, Spec | 4 Cyl 2.4 L GAS
View related parts
2007 Scion tC Emblem, Rear
Part Number: 75441-21070
$26.04 MSRP: $36.25
You Save: $10.21 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, Back Door Name; Hatch Emblem, Rear
- Position: Rear
- Part Name Code: 75441E
- Item Weight: 0.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 75441-21070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Scion tC Submodels:
- Base, Spec | 4 Cyl 2.4 L GAS

2007 Scion tC Emblem

Looking for affordable OEM 2007 Scion tC Emblem? Explore our comprehensive catalogue of genuine 2007 Scion tC Emblem. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2007 Scion tC Parts Questions & Experts Answers

Q: How to remove and install the No. 5 back door Emblem on 2007 Scion tC?
A: A procedure must be followed when removing the No. 5 back door name plate starting with protective tape application around it while placing piano wire between the vehicle body and plate. Pull the piano wire after attaching wood blocks to its ends to scrape away double-sided tape holding the vehicle body to the name plate without causing damage to either component. The vehicle body requires cleaning with the help of a heat light, and then technicians need to remove double-sided tape while cleaning off any adhesive residue with a cleaning agent. To reuse the name plate first heat it under a heat light while removing old tape and cleaning any residue off before adding new double-sided tape. Warm both the name plate and vehicle body surface again before taking off the peeling paper from the name plate front side. After removing the foreign materials from exposed adhesive, install the name plate to match its specified orientation.