Other Name: Knob & Element Assembly; Cigarette Lighter Element; Lighter; Knob; Knob And Element Assembly, Cigarette Lighter; Cigarette Lighter
Replaces: 85520-06020, 85520-30093, 85520-17010
Part Name Code: 85520
Item Weight: 0.50 Pounds
Item Dimensions: 9.2 x 8.2 x 1.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 85520-28010
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2007 Scion tC Submodels:
Base, Spec | 4 Cyl 2.4 L GAS
2007 Scion tC Cigarette Lighter
Looking for affordable OEM 2007 Scion tC Cigarette Lighter? Explore our comprehensive catalogue of genuine 2007 Scion tC Cigarette Lighter. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2007 Scion tC Parts Questions & Experts Answers
Q: How to service the Auxiliary Cigarette Lighter on 2007 Scion tC?
A: The process to service the Cigarette Lighter begins by disconnecting the negative battery terminal cable and waiting at least 90 seconds to stop Air Bag and seat belt pretensioner activation. Regarding the Cigarette Lighter service you should start by removing the manual transaxle shift lever knob sub-assembly then proceed with the front console panel upper and the rear console panel sub-assembly upper and the rear console box sub-assembly. You should turn the socket to break free the claw from the power point socket cover before pulling out the socket assembly. The new power point socket assembly should be aligned to the notch on the power point socket cover before pushing it into place with maximum effort. The required reinstallation order includes the rear console box sub-assembly followed by both the rear console panel sub-assembly upper and front console panel upper elements and finally the shift lever knob sub-assembly. Reconnecting the cable to the negative battery terminal followed by initialization becomes essential for networks that need initialization when the cable is disconnected and reconnected.