How to remove and install the No. 5 back door Emblem on 2006 Scion tC?

Question

Accepted Answer

Before removing the No. 5 back door name plate start by taping its edges and warming the vehicle body along with emblem and name plate with a heat light at a mild temperature. Put a piano wire through the vehicle body to the name plate while attaching wooden blocks as handles to the wire ends. To remove the double-sided tape securing the name plate using wire tension without damaging the vehicle body for reuse purposes. To organize installation you should first wipe off all double-sided tape residue after heating the vehicle body surface with a heat light. When reusing the name plate start with cleaning it followed by heating it before you remove the old tape to apply fresh double-sided tape. Heating both vehicle body and name plate should happen again during the process of removing peeling paper from the name plate while maintaining foreign matter at a distance from the exposed adhesive. You should position the name plate as directed when installing it.

OEM 2006 Scion tC Emblem

3 Emblems found

2006 Scion tC Emblem

2006 Scion tC Nameplate, Rear

2006 Scion tC Emblem, Rear

2006 Scion tC Emblem

2006 Scion tC Parts Questions & Experts Answers

Related 2006 Scion tC Parts

Alternate Year Models