Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2006 Scion tC Submodels:
Base, Spec | 4 Cyl 2.4 L GAS
2006 Scion tC Car Speakers
Looking for affordable OEM 2006 Scion tC Car Speakers? Explore our comprehensive catalogue of genuine 2006 Scion tC Car Speakers. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2006 Scion tC Parts Questions & Experts Answers
Q: How to remove and reinstall the Front No. 1 Car Speakers on the LH side on 2006 Scion tC?
A: The procedure to uninstall the LH Front No. 1 Speaker begins with disconnecting the negative terminal battery cable for 90 seconds to deactivate Air Bags and seat belt pretensioners. Reduce the vehicle by removing the Front Door Lower Frame Bracket Garnish LH followed by Assist Grip Cover LH and Front Door Trim Board Sub-Assembly LH. You should disconnect the connector of the Front No. 1 Speaker Assembly LH before drilling out the 3 rivet heads with a drill bit that is under 4 mm (0.16 in.) in diameter while making careful round cuts near the rivet heads in order to protect the rivet hole from damage and drill bit breakage. Finish drilling until all rivet pieces are pushed out and then vacuum the cleaned drilling areas. Use an air riveter or hand riveter to secure 3 new strike rivets on the front door panel of the Front No. 1 Speaker Assembly LH during installation. Verify that each rivet has proper contact with the speaker without any space between them. Reinstall the Front Door Trim Board Sub-Assembly LH together with the Assist Grip Cover LH and Front Door Lower Frame Bracket Garnish LH after connecting the connector. Except for initialization which should be run after cable reconnection the battery negative terminal must be the last item to be restored.