How to repair a steering wheel that is off center on 2006 Toyota Tundra?

You should start the repair process by placing masking tape along the steering wheel top center and steering column upper cover. During the 100-meter drive maintain a steady speed of 35 mph (56 km/h) while steering directly while keeping the wheel in position. Use the upper surface of the steering wheel and steering spoke as well as the SRS Air Bag line to align the wheel straight before drawing another line through masking tape. Use masking tape to mark a new line and measure its distance from the previous one as a steering angle measurement based on 1 degree equivalence to 1 mm (0.04 inch). Start by raising the vehicle then confirm which method is used for steering angle adjustments. Proceed to mark the RH and LH tie rod and rack end faces for clear visibility followed by paper gauge measurements from the rack end screws to note down these numbers. Use the same amount of rotation on the RH and LH rack ends in opposite directions per the steering angle specification whereby each 1 turn (360 degrees) movement produces 1.5 mm (0.059 inch) of rack end horizontal travel which creates a 12-degree steering angle. Screw the RH and LH lock nuts to 55 Nm torque (560 kgf-cm, 41 ft. lbs.) while verifying that the difference between the RH and LH tie rod ends and rack end screws stays within 1.5 mm (0.059 inch). The process ends with reinstalling both RH and LH boot clips.

OEM 2006 Toyota Tundra Steering Wheel

Navigation Steering Wheel

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Steering Wheels found

View related parts
2006 Toyota Tundra Steering Wheel, Dark Gray
Part Number: 45100-0C140-B1
$328.43 MSRP: $468.91
You Save: $140.48 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Wheel Assembly, Steering
- Manufacturer Note: 4-SPOKE,URETHANE,DK.GRAY,TRIM12
- Part Name Code: 45100
- Item Weight: 5.30 Pounds
- Item Dimensions: 16.5 x 16.0 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 45100-0C140-B1
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Tundra Submodels:
- Base, Limited, SR5 | 6 Cyl 3.4 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2006 Toyota Tundra Steering Wheel
Part Number: 45100-0C140-E1
$320.01 MSRP: $456.90
You Save: $136.89 (30%)
ADD TO CART
Limited Availability
Product Specifications
- Other Name: Wheel Assembly, Steering
- Manufacturer Note: 4-SPOKE,URETHANE,SANDAL WOOD,TRIM42,43
- Part Name Code: 45100
- Item Weight: 5.30 Pounds
- Item Dimensions: 16.9 x 16.0 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 45100-0C140-E1
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Tundra Submodels:
- Base, Limited, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2006 Toyota Tundra Steering Wheel
Part Number: 45100-0C140-B0
$303.89 MSRP: $433.89
You Save: $130.00 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Wheel Assembly, Steering
- Part Name Code: 45100
- Item Weight: 5.10 Pounds
- Item Dimensions: 16.9 x 16.0 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 45100-0C140-B0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Tundra Submodels:
- Base, Limited, SR5 | 6 Cyl 3.4 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2006 Toyota Tundra Steering Wheel
Part Number: 45100-0C181-E1
$831.13 MSRP: $1218.02
You Save: $386.89 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Wheel Assembly, Steering
- Replaces: 45100-0C180-E1
- Part Name Code: 45100
- Item Weight: 5.20 Pounds
- Item Dimensions: 17.2 x 16.4 x 7.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 45100-0C181-E1
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Tundra Submodels:
- Base, Limited, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2006 Toyota Tundra Steering Wheel, Dark Gray
Part Number: 45100-0C161-B1
$425.95 MSRP: $624.24
You Save: $198.29 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Wheel Assembly, Steering
- Manufacturer Note: 4-SPOKE,URETHANE,W(CRUISE CONTROL),DK.GRAY,TRIM12
- Replaces: 45100-0C160-B1
- Part Name Code: 45100
- Item Weight: 5.40 Pounds
- Item Dimensions: 17.2 x 16.3 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 45100-0C161-B1
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Tundra Submodels:
- Base, Limited, SR5 | 6 Cyl 3.4 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2006 Toyota Tundra Steering Wheel
Part Number: 45100-0C161-B0
$425.39 MSRP: $623.40
You Save: $198.01 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Wheel Assembly, Steering
- Manufacturer Note: 4-SPOKE,URETHANE,W(CRUISE CONTROL),DK.CHARCOAL,TRIM11
- Replaces: 45100-0C160-B0
- Part Name Code: 45100
- Item Weight: 5.20 Pounds
- Item Dimensions: 16.7 x 16.4 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 45100-0C161-B0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Tundra Submodels:
- Base, Limited, SR5 | 6 Cyl 3.4 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2006 Toyota Tundra Steering Wheel
Part Number: 45100-0C171-B2
Product Specifications
- Other Name: Wheel Assembly, Steering
- Manufacturer Note: 4-SPOKE,URETHANE,W(CRUISE CONTROL & AUDIO SWITCH),DK.CHARCOAL,TRIM11
- Replaces: 45100-0C170-B0
- Part Name Code: 45100
- Item Weight: 5.50 Pounds
- Item Dimensions: 16.7 x 16.3 x 7.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 45100-0C171-B2
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Tundra Submodels:
- Base, Limited, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS

2006 Toyota Tundra Steering Wheel

Looking for affordable OEM 2006 Toyota Tundra Steering Wheel? Explore our comprehensive catalogue of genuine 2006 Toyota Tundra Steering Wheel. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2006 Toyota Tundra Parts Questions & Experts Answers

Q: How to repair a steering wheel that is off center on 2006 Toyota Tundra?
A: You should start the repair process by placing masking tape along the steering wheel top center and steering column upper cover. During the 100-meter drive maintain a steady speed of 35 mph (56 km/h) while steering directly while keeping the wheel in position. Use the upper surface of the steering wheel and steering spoke as well as the SRS Air Bag line to align the wheel straight before drawing another line through masking tape. Use masking tape to mark a new line and measure its distance from the previous one as a steering angle measurement based on 1 degree equivalence to 1 mm (0.04 inch). Start by raising the vehicle then confirm which method is used for steering angle adjustments. Proceed to mark the RH and LH tie rod and rack end faces for clear visibility followed by paper gauge measurements from the rack end screws to note down these numbers. Use the same amount of rotation on the RH and LH rack ends in opposite directions per the steering angle specification whereby each 1 turn (360 degrees) movement produces 1.5 mm (0.059 inch) of rack end horizontal travel which creates a 12-degree steering angle. Screw the RH and LH lock nuts to 55 Nm torque (560 kgf-cm, 41 ft. lbs.) while verifying that the difference between the RH and LH tie rod ends and rack end screws stays within 1.5 mm (0.059 inch). The process ends with reinstalling both RH and LH boot clips.