Other Name: Sensor Assembly, Side Air Bag; Air Bag Impact Sensor, Front Left; Air Bag Sensor; Side Sensor; Sensor Assembly, Side Air Bag, Passenger Side
Position: Passenger Side
Part Name Code: 89860
Item Weight: 0.60 Pounds
Item Dimensions: 4.3 x 2.6 x 2.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 89860-0C050
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2006 Toyota Tundra Submodels:
Base, Limited, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
Other Name: Sensor, Seat Position; Air Bag Seat Sensor Mat, Front Left; Seat Track Position Sensor, Left; Air Bag Sensor; Occupant Sensor; Discriminating Sensor; Sensor, Seat Position Air Bag
Position: Driver Side
Replaces: 89178-33030
Part Name Code: 89178A
Item Weight: 0.50 Pounds
Item Dimensions: 2.1 x 1.6 x 1.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 89178-33031
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Other Name: Sensor, Seat Position; Seat Track Position Sensor, Front Left; Air Bag Seat Sensor Mat, Front Left; Air Bag Sensor; Occupant Sensor; Discriminating Sensor; Sensor, Seat Position Air Bag
Position: Front Driver Side
Part Name Code: 89178A
Item Weight: 0.50 Pounds
Item Dimensions: 2.2 x 1.6 x 1.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 89178-33020
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Other Name: Sensor, Air Bag, Rear; Air Bag Impact Sensor, Rear Right; Air Bag Sensor; Side Sensor; Sensor, Air Bag, Rear Passenger Side
Position: Rear Passenger Side
Part Name Code: 89833
Item Weight: 0.60 Pounds
Item Dimensions: 4.2 x 2.6 x 2.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 89833-0C030
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2006 Toyota Tundra Submodels:
Base, Limited, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
2006 Toyota Tundra Air Bag Sensor
Looking for affordable OEM 2006 Toyota Tundra Air Bag Sensor? Explore our comprehensive catalogue of genuine 2006 Toyota Tundra Air Bag Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2006 Toyota Tundra Air Bag Sensor Parts Q&A
Q: How to Remove and Install an Air Bag Sensor on 2006 Toyota Tundra?
A: Before starting impact sensor replacement work one must first observe all safety precautions of the restraint system. You should disconnect the cable targeting the negative battery terminal followed by a 90-second wait period before Air Bags will activate. Start the installation by removing the front door scuff plate together with the rear door scuff plate, front seat outer belt floor anchor and center pillar lower garnish and front seat outer belt retractor. The removal process begins with disconnecting the connector from the side Air Bag sensor assembly LH before removing its three bolts. The installation involves fresh SRS components and replacement of any side Air Bag sensors that have deployed in accidents must be avoided. Replace the sensor assembly with a new one if the assembly displays defects and after a drop incident. Position the side Air Bag sensor assembly LH by threading in its three bolts which need to be tightened at 17.5 N.m (179 kgf.cm, 13 ft.lbf) while attaching the connector. The installation process includes the front seat outer belt retractor, center pillar lower garnish, front seat outer belt floor anchor along with rear door scuff plate and front door scuff plate. The SRS warning light inspection follows reconnection of the cable to the negative battery terminal.