OEM 2006 Toyota Solara Blower Motor

2006 Toyota Solara Parts Questions & Experts Answers

• Q: How to service and repair the blower motor on 2006 Toyota Solara?

  A: Services and repairs on the blower motor begin by removing the instrument panel safety pad followed by repairs on heater to foot duct No.1 and stereo component amplifier assembly and ECM. The blower assembly uninstallation process starts by disconnecting connectors then removing a screw and clamp followed by detaching the blower connector holder together with the disconnection of 5 wire harness clamps. When your vehicle has a stereo component amplifier assembly you must disconnect both the 2 wire harness clamps. Installation of the manual A/C requires 4 connector removal with clamp removal but the auto A/C procedure needs connecting 3 connectors with clamp removal. The blower assembly can be replaced after removing its 2 screws and 2 nuts. The blower assembly installation requires you to secure it with a torque setting of 1.5 N.m (15 kgf.cm, 12 in.lbf) after using the 2 screws and 2 nuts. When installing the manual A/C model utilize the clamp to connect its 4 connectors whereas the auto A/C model requires the clamp to unite its 3 connectors. The stereo component amplifier assembly should receive its 2 wire harness clamps before the 5 wire harness clamps are installed. The process finishes with installation of the instrument panel safety pad once you connect the connectors while securing the blower connector holder with screw and clamp.