How to service the exhaust pipe on 2006 Toyota Sienna?

The exhaust pipe servicing procedure starts by taking out the floor carpet cover center LH followed by disconnecting the heated oxygen sensors from Bank 2 Sensor 2 and Bank 1 Sensor 2 while also removing their connectors and wire harness clamps and grommets. You must start by removing the exhaust pipe assembly tail through the detachment of 2 bolts and elevation of the tail and gasket from all 4 exhaust pipe supports. Unscrew both bolts and nuts securing the exhaust pipe assembly center before disassembling the center together with its gaskets from the two exhaust pipe supports. Begin by removing the two nuts from the exhaust pipe front before detaching the front section together with its gasket. Begin installing by placing a new gasket on the exhaust pipe assembly front followed by tightening its 2 nuts to 62 Nm (632 kgf-cm, 46 ft. lbs.). The next step involves attaching the exhaust pipe center onto the 2 exhaust pipe supports through installation of 2 new gaskets and securing the 2 bolts at 43 Nm (438 kgf-cm, 32 ft. lbs.) and the 2 new nuts at 62 Nm (632 kgf-cm, 46 ft. lbs.). Fasten the exhaust pipe assembly tail to the 4 exhaust pipe supports through a new gasket while tightening its 2 bolts to 43 Nm (438 kgf-cm, 32 ft. lbs.). The technician must install the oxygen sensor before applying torque of 44 Nm (450 kgf-cm, 33 ft. lbs.) and verify exhaust gas leaks before restoring the floor carpet cover center LH.

OEM 2006 Toyota Sienna Exhaust Pipe

Exhaust Tail Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Exhaust Pipes found

View related parts
2006 Toyota Sienna Front Pipe
Part Number: 17410-0A390
$342.89 MSRP: $460.26
You Save: $117.37 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Exhaust Crossover Pipe; Exhaust Y Pipe; Exhaust Pipe; Pipe Assembly, Exhaust, Front
- Position: Front
- Part Name Code: 17410
- Item Weight: 10.90 Pounds
- Item Dimensions: 48.6 x 17.8 x 9.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17410-0A390
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Sienna Submodels:
- CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS
View related parts
2006 Toyota Sienna Front Pipe
Part Number: 17410-0A400
$291.69 MSRP: $381.45
You Save: $89.76 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Exhaust Intermediate Pipe, Front; Exhaust Pipe; Pipe Assembly, Exhaust, Front
- Position: Front
- Part Name Code: 17410
- Item Weight: 11.30 Pounds
- Item Dimensions: 46.8 x 18.2 x 9.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17410-0A400
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Sienna Submodels:
- CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS
View related parts
2006 Toyota Sienna Front Pipe
Part Number: 17410-0P180
$261.39 MSRP: $341.83
You Save: $80.44 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Exhaust Intermediate Pipe, Front; Exhaust Pipe; Front Shield; Pipe Assembly, Exhaust, Front
- Position: Front
- Replaces: 17410-31660
- Part Name Code: 17410
- Item Weight: 8.10 Pounds
- Item Dimensions: 48.6 x 18.7 x 9.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17410-0P180
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Sienna Submodels:
- CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
2006 Toyota Sienna Intermediate Pipe, Center
Part Number: 17420-0A260
$1666.11 MSRP: $2236.41
You Save: $570.30 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Catalytic Converter; Exhaust Y Pipe; Exhaust Pipe; Converter & Pipe; Pipe Assembly, Exhaust, Center
- Position: Center
- Part Name Code: 17420
- Item Weight: 16.60 Pounds
- Item Dimensions: 51.9 x 20.0 x 9.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17420-0A260
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Sienna Submodels:
- CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS
View related parts
2006 Toyota Sienna Intermediate Pipe, Center
Part Number: 17420-0A252
$1554.86 MSRP: $2087.07
You Save: $532.21 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Catalytic Converter; Exhaust Pipe; Converter & Pipe; Pipe Assembly, Exhaust, Center
- Position: Center
- Part Name Code: 17420
- Item Weight: 16.90 Pounds
- Item Dimensions: 51.9 x 19.8 x 9.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17420-0A252
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Sienna Submodels:
- CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS
View related parts
2006 Toyota Sienna Muffler & Tail Pipe
Part Number: 17430-0A280
$614.56 MSRP: $824.91
You Save: $210.35 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Muffler; Direct-Fit Exhaust; System Kit; Pipe; Muffler & Pipe; Pipe Assembly, Exhaust, Tail; Muffler
- Part Name Code: 17430
- Item Weight: 11.20 Pounds
- Item Dimensions: 44.4 x 12.7 x 9.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17430-0A280
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Sienna Submodels:
- CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS
View related parts
2006 Toyota Sienna Muffler & Tail Pipe
Part Number: 17430-0A273
$528.39 MSRP: $709.25
You Save: $180.86 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Muffler; Direct-Fit Exhaust; System Kit; Tail Pipe; Muffler & Pipe; Pipe Assembly, Exhaust, Tail; Muffler
- Part Name Code: 17430
- Item Weight: 10.60 Pounds
- Item Dimensions: 43.6 x 12.2 x 9.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17430-0A273
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Sienna Submodels:
- CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS

2006 Toyota Sienna Exhaust Pipe

Looking for affordable OEM 2006 Toyota Sienna Exhaust Pipe? Explore our comprehensive catalogue of genuine 2006 Toyota Sienna Exhaust Pipe. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2006 Toyota Sienna Parts Questions & Experts Answers

Q: How to service the exhaust pipe on 2006 Toyota Sienna?
A: The exhaust pipe servicing procedure starts by taking out the floor carpet cover center LH followed by disconnecting the heated oxygen sensors from Bank 2 Sensor 2 and Bank 1 Sensor 2 while also removing their connectors and wire harness clamps and grommets. You must start by removing the exhaust pipe assembly tail through the detachment of 2 bolts and elevation of the tail and gasket from all 4 exhaust pipe supports. Unscrew both bolts and nuts securing the exhaust pipe assembly center before disassembling the center together with its gaskets from the two exhaust pipe supports. Begin by removing the two nuts from the exhaust pipe front before detaching the front section together with its gasket. Begin installing by placing a new gasket on the exhaust pipe assembly front followed by tightening its 2 nuts to 62 Nm (632 kgf-cm, 46 ft. lbs.). The next step involves attaching the exhaust pipe center onto the 2 exhaust pipe supports through installation of 2 new gaskets and securing the 2 bolts at 43 Nm (438 kgf-cm, 32 ft. lbs.) and the 2 new nuts at 62 Nm (632 kgf-cm, 46 ft. lbs.). Fasten the exhaust pipe assembly tail to the 4 exhaust pipe supports through a new gasket while tightening its 2 bolts to 43 Nm (438 kgf-cm, 32 ft. lbs.). The technician must install the oxygen sensor before applying torque of 44 Nm (450 kgf-cm, 33 ft. lbs.) and verify exhaust gas leaks before restoring the floor carpet cover center LH.