My Garage
Cart

OEM 2006 Toyota Sienna Brake Master Cylinder

  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Master Cylinders found

  • 2006 Toyota Sienna Brake Master Cylinder - 47207-08011
    2006 Toyota Sienna Brake Master Cylinder Diagram - 47207-08011
    View related parts

    2006 Toyota Sienna Master Cylinder

    Part Number: 47207-08011
    $220.17 MSRP: $314.36
    You Save: $94.19 (30%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Cylinder Sub-Assembly, Brake Stroke Simulator; Brake Master Cylinder; Brake Reservoir; Cylinder Sub-Assembly, Brake Master Less Reservoir Tank
    • Manufacturer Note: W(VSC)
    • Part Name Code: 47207
    • Item Weight: 3.70 Pounds
    • Item Dimensions: 13.1 x 7.2 x 7.3 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 47207-08011
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    More Info
    Fits the following 2006 Toyota Sienna Submodels:
    • CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
  • 2006 Toyota Sienna Brake Master Cylinder - 47207-08020
    2006 Toyota Sienna Brake Master Cylinder Diagram - 47207-08020
    View related parts

    2006 Toyota Sienna Master Cylinder

    Part Number: 47207-08020
    $389.52 MSRP: $570.85
    You Save: $181.33 (32%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Cylinder Sub-Assembly, Brake Stroke Simulator; Brake Master Cylinder; Brake Reservoir; Cylinder Sub-Assembly, Brake Master Less Reservoir Tank
    • Part Name Code: 47207
    • Item Weight: 2.40 Pounds
    • Item Dimensions: 10.0 x 7.6 x 5.3 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 47207-08020
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    More Info
    Fits the following 2006 Toyota Sienna Submodels:
    • CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS

2006 Toyota Sienna Brake Master Cylinder

Looking for affordable OEM 2006 Toyota Sienna Brake Master Cylinder? Explore our comprehensive catalogue of genuine 2006 Toyota Sienna Brake Master Cylinder. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2006 Toyota Sienna Parts Questions & Experts Answers

  • Q: How to service and repair the brake master cylinder on 2006 Toyota Sienna?
    A: Start brake master cylinder service or repair by draining brake fluid then clean all paint surfaces avoided by escaping fluid. First disconnect the negative terminal of the battery while removing the air cleaner assembly with its hose then taking away the cowl top panel sub-assembly outer front. Use Special Service Tool: 09023-00101 to disconnect the two brake tubes from the assembly along with the reservoir hose by sliding the clip and remove the master cylinder through the two securing nuts. The installation process requires placing the brake master cylinder while securing it with two nuts which must be torqued to 13 Nm (130 kgf-cm, 9 ft. lbs.). Afterwards reconnect the reservoir hose after sliding the clip then use Special Service Tool: 09023-00101 to reattach the two brake tubes while torquing them to 15 Nm (155 kgf-cm, 11 ft. lbs.). After brake fluid filling and before reinstalling the air cleaner unit with hose attachment, perform a brake master cylinder bleed operation on brake line components together with brake fluid check in the reservoir and leak detection and cowl top panel sub-assembly outer front reinsertion. Finally, verify brake pedal height and operate a brake actuator test with an intelligent tester.

Related 2006 Toyota Sienna Parts