What is the proper procedure for safely activating and disposing of a front seat outer belt with a seat belt pretensioner using Special Service Tool 09082-00700, both when installed and not installed on 2006 Toyota Sequoia?

It is essential to activate the seat belt pretensioner prior to scrapping vehicles or disposing of front seat outer belts that have seat belt pretensioners. Any irregularities that occur during activation need immediate reporting to the SERVICE DEPARTMENT of TOYOTA MOTOR SALES U.S.A. INC. Other engineers should refrain from disposing of front seat outer belts that contain unactivated pretensioners due to the potent explosive sound of active pretensioners; activation should take place on a site 10 m (33 ft.) away from the main seat area together with a minimum 10 m (33 ft.) distance from front seat outer belts. Handle activated front seat outer belts with safety glasses and gloves followed by hand washing under water afterward avoid wetting the pretensioner when activated. The procedure must take place outside all electrical interference zones and must be activated with the specified Special Service Tool: 09082-00700. To dispose of the front seat outer belt assembly which is currently installed in the vehicle one needs to prepare a battery to activate the seat belt pretensioner then check the functionality of Special Service Tool: 09082-00700 by connecting the red clip to the battery's positive terminal while connecting the black clip to the negative terminal while ensuring that the yellow connector remains disconnected. Initiate activation of the tool by pressing its switch; verify the LED light activation. Replace the unit if the LED turns on without pressing the switch. First disconnect the tool from its battery supply then detach the pretensioner connector before taking out necessary trim panels while checking the front seat belt buckles for slack alignments. Install the floor anchor on the Special Service Tool before connecting the tools and putting distance between the vehicle and the tools while closing all doors and windows but leaving enough space for the wire harness. The activation switch should only be pressed when no personnel is present inside the vehicle and no person exists within 10 meters from the vehicle. The front seat outer belt should remain untouched for 30 minutes after activation before proper disposal. The procedure for belt waste disposal requires seat belt winding followed by cutting 100 mm from the retractor before checking tool performance and connecting them to handle disposal of the used belt on ground-tire cover then moving the tool at least 10 meters away. Activation starts by attaching clip wires to the battery before using the activation switch while keeping a 10 m distance from anyone. Execute the pretensioner activation then discard the belt by placing it inside a plastic bag which you should tightly tie before trashing it along other generic components.

OEM 2006 Toyota Sequoia Seat Belt

Seat Safety Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

34 Seat Belts found

View related parts
2006 Toyota Sequoia Buckle End, Driver Side
Part Number: 73240-0C040-B0
$48.39 MSRP: $67.35
You Save: $18.96 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Assembly, Front Seat; Seat Belt Receptacle, Front Left; Buckle; Latch; Belt Assembly, Front Seat Inner, Driver Side
- Position: Driver Side
- Part Name Code: 73240
- Item Weight: 1.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73240-0C040-B0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2006 Toyota Sequoia Buckle End, Driver Side
Part Number: 73240-0C030-B0
$56.87 MSRP: $79.16
You Save: $22.29 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seat Belt Receptacle, Front Left; Buckle; Latch; Belt Assembly, Front Seat Inner, Driver Side
- Position: Driver Side
- Replaced by: 73104-0C010-B0
- Part Name Code: 73240
- Item Weight: 1.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73240-0C030-B0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2006 Toyota Sequoia Lap & Shoulder Belt, Fawn, Center
Part Number: 73301-0C031-E1
$140.40 MSRP: $198.75
You Save: $58.35 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Sub-Assembly, Seat; Seat Belt Lap and Shoulder Belt, Center; Center Seat Belt
- Position: Center
- Replaces: 73301-0C030-E1
- Item Weight: 2.20 Pounds
- Condition: New
- SKU: 73301-0C031-E1
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2006 Toyota Sequoia Lap & Shoulder Belt, Center
Part Number: 73301-0C031-B1
$163.67 MSRP: $231.69
You Save: $68.02 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Sub-Assembly, Seat; Seat Belt Lap and Shoulder Belt, Center; Center Seat Belt
- Position: Center
- Replaces: 73301-0C030-B1
- Item Weight: 3.20 Pounds
- Condition: New
- SKU: 73301-0C031-B1
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2006 Toyota Sequoia Outer Buckle, Fawn, Inner Driver Side
Part Number: 73380-0C010-E2
$25.80 MSRP: $35.91
You Save: $10.11 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Assembly, Rear Seat; Seat Belt Receptacle, Center Left, Rear Left Outer; Buckle; Latch; Belt Assembly, Rear Seat, Inner Driver Side
- Position: Inner Driver Side
- Part Name Code: 73390C
- Item Weight: 0.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73380-0C010-E2
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2006 Toyota Sequoia Buckle, Passenger Side
Part Number: 73050-0C021-B1
$27.00 MSRP: $37.57
You Save: $10.57 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Assembly, Rear Lap; Seat Belt Receptacle, Rear Right; Latch; Belt Assembly, Rear Seat Lap, Center W/Inner Passenger Side
- Manufacturer Note: MD CHARCOAL,TRIM1#
- Position: Passenger Side
- Part Name Code: 73050
- Item Weight: 1.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73050-0C021-B1
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2006 Toyota Sequoia Buckle, Driver Side
Part Number: 73060-0C020-B1
$42.29 MSRP: $58.87
You Save: $16.58 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Assembly, Rear Lap; Seat Belt Receptacle, Rear Left; Latch; Belt Assembly, Rear Seat Lap, Center W/Inner Driver Side
- Position: Driver Side
- Part Name Code: 73060
- Item Weight: 1.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73060-0C020-B1
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2006 Toyota Sequoia Buckle, Fawn, Driver Side
Part Number: 73060-0C020-E1
$42.33 MSRP: $58.92
You Save: $16.59 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Assembly, Rear Lap; Seat Belt Receptacle, Rear Left; Latch; Belt Assembly, Rear Seat Lap, Center W/Inner Driver Side
- Position: Driver Side
- Part Name Code: 73060
- Item Weight: 1.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73060-0C020-E1
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2006 Toyota Sequoia Buckle, Fawn, Front Passenger Side
Part Number: 73230-0C070-E1
$48.98 MSRP: $68.18
You Save: $19.20 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Assembly, Front Seat; Seat Belt Receptacle, Front Right; Latch; Belt Assembly, Front Seat Inner, Passenger Side; Belt Assembly, Front Seat Inner, Driver Side
- Position: Front Passenger Side
- Item Weight: 1.50 Pounds
- Item Dimensions: 13.7 x 11.2 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73230-0C070-E1
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2006 Toyota Sequoia Lap & Shoulder Belt, Fawn, Passenger Side
Part Number: 73210-0C040-E0
$253.96 MSRP: $362.60
You Save: $108.64 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Assembly, Front Seat; Seat Belt Lap and Shoulder Belt, Front Right; Retractor Assembly; Belt & Retractor; Belt Assembly, Front Seat Outer, Passenger Side
- Position: Passenger Side
- Part Name Code: 73210
- Item Weight: 4.20 Pounds
- Item Dimensions: 10.5 x 7.4 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73210-0C040-E0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2006 Toyota Sequoia Buckle End, Fawn, Driver Side
Part Number: 73240-0C030-E0
$31.70 MSRP: $44.13
You Save: $12.43 (29%)
Product Specifications
- Other Name: Seat Belt Receptacle, Front Left; Buckle; Latch; Belt Assembly, Front Seat Inner, Driver Side
- Position: Driver Side
- Part Name Code: 73240
- Item Weight: 0.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73240-0C030-E0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2006 Toyota Sequoia Buckle End, Fawn, Driver Side
Part Number: 73240-0C040-E0
Product Specifications
- Other Name: Belt Assembly, Front Seat; Seat Belt Receptacle, Front Left; Buckle; Latch; Belt Assembly, Front Seat Inner, Driver Side
- Position: Driver Side
- Part Name Code: 73240
- Item Weight: 0.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73240-0C040-E0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2006 Toyota Sequoia Outer Buckle, Fawn, Inner Driver Side
Part Number: 73380-0C010-B2
Product Specifications
- Other Name: Belt Assembly, Rear Seat; Seat Belt Receptacle, Center Left, Rear Left Outer; Buckle; Latch; Belt Assembly, Rear Seat, Inner Driver Side
- Position: Inner Driver Side
- Part Name Code: 73390C
- Item Weight: 1.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73380-0C010-B2
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2006 Toyota Sequoia Outer Buckle, Fawn, Rear Passenger Side
Part Number: 73380-0C020-E2
Product Specifications
- Other Name: Belt Assembly, Rear Seat; Seat Belt Receptacle, Center Right, Rear Right Outer; Buckle; Latch; Belt Assembly, Rear Seat, Inner Passenger Side; Belt Assembly, Rear Seat, Inner Driver Side
- Position: Rear Passenger Side
- Item Weight: 0.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73380-0C020-E2
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2006 Toyota Sequoia Lap & Shoulder Belt, Fawn, Outer Driver Side
Part Number: 73570-0C020-E1
Product Specifications
- Other Name: Belt Assembly, Rear Seat; Seat Belt Lap and Shoulder Belt, Rear Left; Belt & Retractor; Belt Assembly, Rear Seat, Outer Driver Side
- Manufacturer Note: FAWN,TRIM4#
- Position: Outer Driver Side
- Part Name Code: 73570
- Item Weight: 2.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73570-0C020-E1
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2006 Toyota Sequoia Lap & Shoulder Belt, Fawn, Outer
Part Number: 73360-0C040-E1
Product Specifications
- Other Name: Belt Assembly, Rear Seat; Seat Belt Lap and Shoulder Belt, Center Right; Belt & Retractor; Belt Assembly, Rear Seat, Outer
- Manufacturer Note: FAWN,TRIM4#
- Position: Outer
- Part Name Code: 73360B
- Item Weight: 2.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73360-0C040-E1
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2006 Toyota Sequoia Lap & Shoulder Belt, Fawn, Outer
Part Number: 73370-0C040-E1
Product Specifications
- Other Name: Belt Assembly, Rear Seat; Seat Belt Lap and Shoulder Belt, Center Left; Belt & Retractor; Belt Assembly, Rear Seat, Outer
- Manufacturer Note: FAWN,TRIM4#
- Position: Outer
- Part Name Code: 73370B
- Item Weight: 3.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73370-0C040-E1
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2006 Toyota Sequoia Lap & Shoulder Belt, Outer
Part Number: 73360-0C040-B1
Product Specifications
- Other Name: Belt Assembly, Rear Seat; Seat Belt Lap and Shoulder Belt, Center Right; Belt & Retractor; Belt Assembly, Rear Seat, Outer
- Manufacturer Note: MD.CHARCOAL,TRIM1#
- Position: Outer
- Part Name Code: 73360B
- Item Weight: 4.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73360-0C040-B1
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2006 Toyota Sequoia Lap & Shoulder Belt, Outer
Part Number: 73370-0C040-B1
Product Specifications
- Other Name: Belt Assembly, Rear Seat; Seat Belt Lap and Shoulder Belt, Center Left; Belt & Retractor; Belt Assembly, Rear Seat, Outer
- Manufacturer Note: MD.CHARCOAL,TRIM1#
- Position: Outer
- Part Name Code: 73370B
- Item Weight: 2.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73370-0C040-B1
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2006 Toyota Sequoia Lap & Shoulder Belt, Passenger Side
Part Number: 73210-0C040-B1
Product Specifications
- Other Name: Belt Assembly, Front Seat; Seat Belt Lap and Shoulder Belt, Front Right; Retractor Assembly; Belt & Retractor; Belt Assembly, Front Seat Outer, Passenger Side
- Position: Passenger Side
- Part Name Code: 73210
- Item Weight: 4.00 Pounds
- Item Dimensions: 10.2 x 7.4 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73210-0C040-B1
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS

| Page 1 of 2 |Next >

1-20 of 34 Results

2006 Toyota Sequoia Seat Belt

Looking for affordable OEM 2006 Toyota Sequoia Seat Belt? Explore our comprehensive catalogue of genuine 2006 Toyota Sequoia Seat Belt. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2006 Toyota Sequoia Parts Questions & Experts Answers

Q: What is the proper procedure for safely activating and disposing of a front seat outer belt with a seat belt pretensioner using Special Service Tool 09082-00700, both when installed and not installed on 2006 Toyota Sequoia?
A: It is essential to activate the seat belt pretensioner prior to scrapping vehicles or disposing of front seat outer belts that have seat belt pretensioners. Any irregularities that occur during activation need immediate reporting to the SERVICE DEPARTMENT of TOYOTA MOTOR SALES U.S.A. INC. Other engineers should refrain from disposing of front seat outer belts that contain unactivated pretensioners due to the potent explosive sound of active pretensioners; activation should take place on a site 10 m (33 ft.) away from the main seat area together with a minimum 10 m (33 ft.) distance from front seat outer belts. Handle activated front seat outer belts with safety glasses and gloves followed by hand washing under water afterward avoid wetting the pretensioner when activated. The procedure must take place outside all electrical interference zones and must be activated with the specified Special Service Tool: 09082-00700. To dispose of the front seat outer belt assembly which is currently installed in the vehicle one needs to prepare a battery to activate the seat belt pretensioner then check the functionality of Special Service Tool: 09082-00700 by connecting the red clip to the battery's positive terminal while connecting the black clip to the negative terminal while ensuring that the yellow connector remains disconnected. Initiate activation of the tool by pressing its switch; verify the LED light activation. Replace the unit if the LED turns on without pressing the switch. First disconnect the tool from its battery supply then detach the pretensioner connector before taking out necessary trim panels while checking the front seat belt buckles for slack alignments. Install the floor anchor on the Special Service Tool before connecting the tools and putting distance between the vehicle and the tools while closing all doors and windows but leaving enough space for the wire harness. The activation switch should only be pressed when no personnel is present inside the vehicle and no person exists within 10 meters from the vehicle. The front seat outer belt should remain untouched for 30 minutes after activation before proper disposal. The procedure for belt waste disposal requires seat belt winding followed by cutting 100 mm from the retractor before checking tool performance and connecting them to handle disposal of the used belt on ground-tire cover then moving the tool at least 10 meters away. Activation starts by attaching clip wires to the battery before using the activation switch while keeping a 10 m distance from anyone. Execute the pretensioner activation then discard the belt by placing it inside a plastic bag which you should tightly tie before trashing it along other generic components.

Related 2006 Toyota Sequoia Parts

Alternate Year Models

2005 Toyota Sequoia Seat Belt 2007 Toyota Sequoia Seat Belt