How to service the center Air Bag sensor assembly on 2006 Toyota Sequoia?

Your first step for servicing the center Air Bag sensor assembly must start with reading the precautions carefully. Remove the negative cable from the battery and wait 90 seconds to avoid activated Air Bags. Begin the service procedure by taking off the shifting hole cover together with upper console panel along with rear console box and front console box. Detach the holder with connectors that is connected to the center Air Bag sensor assembly before removing the four securing bolts. The installation process should begin after disconnecting the negative battery terminal for at least 90 seconds when the ignition switch is turned off. The temporary installation of the center Air Bag sensor assembly includes four bolts installation while checking for drops or defects in the assembly. Every SRS wire should be checked to confirm it avoids other system elements along with being free of pinching points. Tighten the four bolts to 17.5 N.m (179 kgf.cm, 13 ft.lbf) before checking the entire assembly for installation looseness. After verifying the waterproof sheet position the holder can get installed with connectors. The service procedure requires reinstalling front and rear console boxes alongside upper console panel and shifting hole cover. Next reconnect the battery cable to its negative terminal. The final step of initialization exists for systems needing it after disconnecting the negative terminal while the SRS warning light needs inspection.

OEM 2006 Toyota Sequoia Air Bag Sensor

Air Bag Impact Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Air Bag Sensors found

View related parts
2006 Toyota Sequoia Air Bag Sensor, Center
Part Number: 89170-0C142
$299.51 MSRP: $367.32
You Save: $67.81 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Air Bag; Air Bag Impact Sensor, Center; Diagnostic Module
- Position: Center
- Replaces: 89170-0C141, 89170-0C140
- Item Weight: 2.20 Pounds
- Condition: New
- SKU: 89170-0C142
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2006 Toyota Sequoia Air Bag Sensor, Front Driver Side
Part Number: 89174-09040
$98.46 MSRP: $118.71
You Save: $20.25 (18%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Bag, Front; Air Bag Impact Sensor, Front Left, Left; Impact Sensor; Front Sensor; Sensor, Air Bag, Front Driver Side
- Position: Front Driver Side
- Part Name Code: 89174A
- Item Weight: 0.70 Pounds
- Item Dimensions: 4.7 x 2.9 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89174-09040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2006 Toyota Sequoia Air Bag Sensor, Front Passenger Side
Part Number: 89173-09200
$98.46 MSRP: $118.71
You Save: $20.25 (18%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Bag, Front; Air Bag Impact Sensor, Front Right, Right; Impact Sensor; Front Sensor; Sensor, Air Bag, Front Passenger Side
- Position: Front Passenger Side
- Part Name Code: 89173A
- Item Weight: 0.70 Pounds
- Item Dimensions: 4.7 x 2.9 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89173-09200
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2006 Toyota Sequoia Air Bag Sensor, Rear Driver Side
Part Number: 89834-0C020
$120.97 MSRP: $171.24
You Save: $50.27 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Bag, Rear; Air Bag Impact Sensor, Rear Left; Side Sensor; Sensor, Air Bag, Rear Driver Side
- Position: Rear Driver Side
- Part Name Code: 89834
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.3 x 2.6 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89834-0C020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2006 Toyota Sequoia Air Bag Sensor, Rear Passenger Side
Part Number: 89833-0C020
$284.66 MSRP: $406.42
You Save: $121.76 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Bag, Rear; Air Bag Impact Sensor, Rear Right; Side Sensor; Sensor, Air Bag, Rear Passenger Side
- Position: Rear Passenger Side
- Part Name Code: 89833
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.2 x 2.6 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89833-0C020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2006 Toyota Sequoia Air Bag Sensor, Passenger Side
Part Number: 89860-0C040
Product Specifications
- Other Name: Sensor Assembly, Side Air Bag; Air Bag Impact Sensor, Right; Side Sensor; Sensor Assembly, Side Air Bag, Passenger Side
- Position: Passenger Side
- Part Name Code: 89860
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.2 x 2.6 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89860-0C040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2006 Toyota Sequoia Air Bag Sensor, Driver Side
Part Number: 89830-0C040
Product Specifications
- Other Name: Sensor Assembly, Side Air Bag; Air Bag Impact Sensor, Left; Side Sensor; Sensor Assembly, Side Air Bag, Driver Side
- Position: Driver Side
- Part Name Code: 89860A
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.3 x 2.6 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89830-0C040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS

2006 Toyota Sequoia Air Bag Sensor

Looking for affordable OEM 2006 Toyota Sequoia Air Bag Sensor? Explore our comprehensive catalogue of genuine 2006 Toyota Sequoia Air Bag Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2006 Toyota Sequoia Parts Questions & Experts Answers

Q: How to service the center Air Bag sensor assembly on 2006 Toyota Sequoia?
A: Your first step for servicing the center Air Bag sensor assembly must start with reading the precautions carefully. Remove the negative cable from the battery and wait 90 seconds to avoid activated Air Bags. Begin the service procedure by taking off the shifting hole cover together with upper console panel along with rear console box and front console box. Detach the holder with connectors that is connected to the center Air Bag sensor assembly before removing the four securing bolts. The installation process should begin after disconnecting the negative battery terminal for at least 90 seconds when the ignition switch is turned off. The temporary installation of the center Air Bag sensor assembly includes four bolts installation while checking for drops or defects in the assembly. Every SRS wire should be checked to confirm it avoids other system elements along with being free of pinching points. Tighten the four bolts to 17.5 N.m (179 kgf.cm, 13 ft.lbf) before checking the entire assembly for installation looseness. After verifying the waterproof sheet position the holder can get installed with connectors. The service procedure requires reinstalling front and rear console boxes alongside upper console panel and shifting hole cover. Next reconnect the battery cable to its negative terminal. The final step of initialization exists for systems needing it after disconnecting the negative terminal while the SRS warning light needs inspection.