My Garage
Cart

OEM 2006 Toyota RAV4 Wiper Motor

Windshield Wiper Motor
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wiper Motors found

  • 2006 Toyota RAV4 Wiper Motor - 85110-0R011
    2006 Toyota RAV4 Wiper Motor Diagram - 85110-0R011
    View related parts

    2006 Toyota RAV4 Wiper Motor, Front

    Part Number: 85110-0R011
    $166.60 MSRP: $235.85
    You Save: $69.25 (30%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Motor Assembly, Front Wiper; Windshield Wiper Motor; Front Motor
    • Position: Front
    • Replaces: 85110-42150, 85110-42151, 85110-0R010
    • Item Weight: 8.60 Pounds
    • Condition: New
    • SKU: 85110-0R011
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    More Info
    Fits the following 2006 Toyota RAV4 Submodels:
    • Base, Limited, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
  • 2006 Toyota RAV4 Wiper Motor - 85130-42061
    2006 Toyota RAV4 Wiper Motor Diagram - 85130-42061
    View related parts

    2006 Toyota RAV4 Wiper Motor, Rear

    Part Number: 85130-42061
    $193.03 MSRP: $275.60
    You Save: $82.57 (30%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Motor Assembly, Rear Wiper; Back Glass Wiper Motor; Rear Motor
    • Position: Rear
    • Replaces: 85130-42060
    • Part Name Code: 85110R
    • Item Weight: 3.30 Pounds
    • Item Dimensions: 11.9 x 7.4 x 4.6 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 85130-42061
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    More Info
    Fits the following 2006 Toyota RAV4 Submodels:
    • Base, Limited, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS

2006 Toyota RAV4 Wiper Motor

Looking for affordable OEM 2006 Toyota RAV4 Wiper Motor? Explore our comprehensive catalogue of genuine 2006 Toyota RAV4 Wiper Motor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2006 Toyota RAV4 Parts Questions & Experts Answers

  • Q: How to service and repair the front wiper motor and link on 2006 Toyota RAV4?
    A: No repairs or services can begin on the front wiper motor and link until the negative battery terminal cable get disconnected for at least 90 seconds to neutralize the Air Bag and seat belt pretensioners from activating. Start the procedure by removing 2 caps from the wiper head cap before disconnecting the front wiper arm assemblies with their respective nuts on both sides. Remove the seals between the front fender and the cowl by detaching claw fasteners from both sides while on the other hand take away the cowl top ventilator louver by removing two clips and 12 claws. Begin by disconnecting the clamp and pulling the connector loose while moving the wiper cushion according to indicated steps. Subsequently remove the 2 bolts from the windshield wiper motor and link assembly. A screwdriver should be used to disconnect the rod from the wiper motor followed by matchmarking both the crank arm and motor then removing the three bolts from the assembly. The installation begins by securing the windshield wiper motor assembly through three bolts reaching a torque of 5.4 N.m (55 kgf.cm, 48 in.lbf) and matching marks while adding MP grease to moving components and connecting the rod to the wiper motor. To install the windshield wiper motor with link assembly you must move it according to the instructions while attaching the wiper cushion and securing two bolts at a torque of 5.5 N.m (56 kgf.cm, 49 in.lbf) and connecting the connector. The cowl top ventilator louver needs installation with 12 claw fasteners and two clips before placing the front fender to cowl side seals on both sides. The right side front wiper arm and blade installation requires stopping the motor at automatic stop then cleaning arm serrations before securing the arm with 21 N.m (214 kgf.cm, 23 ft.lbf) torque while keeping pressure on the arm hinge. The left side installation of the blade and cleaning process must continue without allowing contact between the blades and pillar during front wiper operation with water or washer fluid. To complete the installation place the front wiper arm head cap on its 2 caps while reattaching the cable to the negative battery terminal.

Related 2006 Toyota RAV4 Parts