My Garage
Cart

OEM 2006 Scion xB Sway Bar Kit

Stabilizer Sway Bar Set
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Sway Bar Kit found

  • 2006 Scion xB Sway Bar Kit - 48811-52060
    2006 Scion xB Sway Bar Kit Diagram - 48811-52060
    View related parts

    2006 Scion xB Stabilizer Bar, Front

    Part Number: 48811-52060
    $119.25 MSRP: $168.81
    You Save: $49.56 (30%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Bar, Stabilizer, Front; Suspension Stabilizer Bar, Front; Sway Bar
    • Position: Front
    • Part Name Code: 48811
    • Item Weight: 8.10 Pounds
    • Item Dimensions: 43.8 x 12.1 x 4.8 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 48811-52060
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    More Info
    Fits the following 2006 Scion xB Submodels:
    • Base | 4 Cyl 1.5 L GAS

2006 Scion xB Sway Bar Kit

Looking for affordable OEM 2006 Scion xB Sway Bar Kit? Explore our comprehensive catalogue of genuine 2006 Scion xB Sway Bar Kit. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2006 Scion xB Parts Questions & Experts Answers

  • Q: How to service and repair the front Sway Bar Kit on 2006 Scion xB?
    A: Start sway bar kit front repairs by removing the front wheel followed by the hood sub-assembly and suspending the engine assembly. Start service of the front sway bar kit by disconnecting both front suspension No. 1 lower arm sub-assemblies on left and right sides before moving on to the front sway bar kit followed by power steering link assembly and pressure feed tube assembly and front suspension crossmember sub-assembly. The front sway bar kit removal requires disassembly of four bolts and two bushes along with No. 1 sway bar brackets from both sides before you can remove the bar itself. Install the new sway bar kit with its attached bushes and brackets while using four bolts for securing the structure until it reaches a torque value of 37 Nm (377 kgf-cm, 27 ft. lbs.). Maintain the bushes with the slit positioned toward the vehicle's rear side while keeping them externally past the paint lines. Begin by attaching the front suspension crossmember sub-assembly and pressure feed tube assembly and power steering link assembly and the front sway bar kit followed by connecting the front suspension No. 1 lower arm sub-assemblies on both sides. The front wheel needs to be reinstalled with 103 Nm (1,050 kgf-cm, 76 ft. lbs.) torque before the hood sub-assembly is reinstalled while checking for any required adjustments. The end of the process includes checking and readjusting the front wheel alignment if required.

Related 2006 Scion xB Parts