How to Service and Repair a Speed Sensor on 2006 Scion xB?

Start servicing the skid control sensor by disconnecting the cable from the negative battery terminal then waiting 90 seconds to avoid triggering the Air Bag and seat belt pretensioner systems. Take off the back wheel then extract the skid control sensor wire and remove its connections. Before you take out the brake drum mark its rear part and axle hub. Locate the rear axle hub and bearing assembly within the vehicle and remove it. Install the hub and bearing set into a soft-chassis vise for safekeeping and replace them immediately if they encounter shock or impact. Insert a pin punch into Special Service Tool: 09520-00031 pin holes and pound them out with a hammer to detach two pins. Then remove the two tool features that join. Take 2 bolts (12 mm in diameter with a 1.5 mm pitch) to remove the skid control sensor from the rear axle hub using tools 09520-00040 (09520-00031), 09521-00020, 09950-00020 while protecting the sensor contact surface from scratches. Clean the contact area of the hub and new sensor before placing the sensor directly onto the lowest position of the connector. Install the skid control sensor with Special Service Tool: 09214-76011 and a press to shield the detection area from direct hammer contact. Before moving ahead install the rear brake drum sub-assembly then measure the rear axle alignment. Connect the skid control wire then install the exhaust wheel using 103 N.m (1,050kgf.cm, 76 ft.lbf) torque and restore power from the negative battery end after checking ABS speed sensor performance.

OEM 2006 Scion xB Speed Sensor

Speed Control Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Speed Sensors found

View related parts
2006 Scion xB Vehicle Speed Sensor
Part Number: 89413-0C011
$105.69 MSRP: $148.35
You Save: $42.66 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Transmission; Input Sensor; Output Sensor; Transmission Revolution Sensors (SP2, NT)
- Manufacturer Note: (L)
- Replaces: 89413-0C010, 89413-32011, 89413-32010
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89413-0C011
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Scion xB Submodels:
- Base | 4 Cyl 1.5 L GAS
View related parts
2006 Scion xB ABS Sensor, Front Driver Side
Part Number: 89543-52010
$228.91 MSRP: $326.83
You Save: $97.92 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Speed, Front Left-Hand; ABS Wheel Speed Sensor, Front Left; Sensor, Wheel Speed; Front Speed Sensor; Sensor, Speed, Front Driver Side; ABS Wheel Speed Sensor
- Position: Front Driver Side
- Part Name Code: 89543
- Item Weight: 0.90 Pounds
- Item Dimensions: 10.1 x 6.7 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89543-52010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Scion xB Submodels:
- Base | 4 Cyl 1.5 L GAS
View related parts
2006 Scion xB ABS Sensor, Front Passenger Side
Part Number: 89542-52010
$228.91 MSRP: $326.83
You Save: $97.92 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Speed, Front Right-Hand; ABS Wheel Speed Sensor, Front Right; Sensor, Wheel Speed; Front Speed Sensor; Sensor, Speed, Front Passenger Side; ABS Wheel Speed Sensor
- Position: Front Passenger Side
- Part Name Code: 89542
- Item Weight: 0.90 Pounds
- Item Dimensions: 10.2 x 6.6 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89542-52010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Scion xB Submodels:
- Base | 4 Cyl 1.5 L GAS
View related parts
2006 Scion xB ABS Sensor, Rear
Part Number: 89544-52030
$189.88 MSRP: $232.88
You Save: $43.00 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Skid Control; ABS Wheel Speed Sensor, Rear, Rear Left, Rear Right; Sensor Ring; Sensor
- Manufacturer Note: NSK
- Position: Rear
- Replaces: 89544-52020
- Part Name Code: 89544
- Item Weight: 0.80 Pounds
- Item Dimensions: 10.1 x 6.5 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 89544-52030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Scion xB Submodels:
- Base | 4 Cyl 1.5 L GAS
View related parts
2006 Scion xB ABS Sensor, Rear
Part Number: 89544-12010
$189.88 MSRP: $232.88
You Save: $43.00 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Skid Control; ABS Wheel Speed Sensor, Rear; Sensor Ring; Sensor; ABS Wheel Speed Sensor
- Manufacturer Note: KOYO
- Position: Rear
- Part Name Code: 89544
- Item Weight: 0.80 Pounds
- Item Dimensions: 9.7 x 6.3 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 89544-12010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Scion xB Submodels:
- Base | 4 Cyl 1.5 L GAS

2006 Scion xB Speed Sensor

Looking for affordable OEM 2006 Scion xB Speed Sensor? Explore our comprehensive catalogue of genuine 2006 Scion xB Speed Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2006 Scion xB Parts Questions & Experts Answers

Q: How to Service and Repair a Speed Sensor on 2006 Scion xB?
A: Start servicing the skid control sensor by disconnecting the cable from the negative battery terminal then waiting 90 seconds to avoid triggering the Air Bag and seat belt pretensioner systems. Take off the back wheel then extract the skid control sensor wire and remove its connections. Before you take out the brake drum mark its rear part and axle hub. Locate the rear axle hub and bearing assembly within the vehicle and remove it. Install the hub and bearing set into a soft-chassis vise for safekeeping and replace them immediately if they encounter shock or impact. Insert a pin punch into Special Service Tool: 09520-00031 pin holes and pound them out with a hammer to detach two pins. Then remove the two tool features that join. Take 2 bolts (12 mm in diameter with a 1.5 mm pitch) to remove the skid control sensor from the rear axle hub using tools 09520-00040 (09520-00031), 09521-00020, 09950-00020 while protecting the sensor contact surface from scratches. Clean the contact area of the hub and new sensor before placing the sensor directly onto the lowest position of the connector. Install the skid control sensor with Special Service Tool: 09214-76011 and a press to shield the detection area from direct hammer contact. Before moving ahead install the rear brake drum sub-assembly then measure the rear axle alignment. Connect the skid control wire then install the exhaust wheel using 103 N.m (1,050kgf.cm, 76 ft.lbf) torque and restore power from the negative battery end after checking ABS speed sensor performance.