×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2006 Scion xB Brake Master Cylinder
- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Brake Master Cylinder found
2006 Scion xB Master Cylinder
Part Number: 47207-52041$287.86 MSRP: $411.00You Save: $123.14 (30%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Cylinder Sub-Assembly, Brake Stroke Simulator; Brake Master Cylinder; Brake Reservoir; Cylinder Sub-Assembly, Brake Master Less Reservoir Tank
- Part Name Code: 47207
- Item Weight: 2.40 Pounds
- Item Dimensions: 10.1 x 7.4 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 47207-52041
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2006 Scion xB Brake Master Cylinder
Looking for affordable OEM 2006 Scion xB Brake Master Cylinder? Explore our comprehensive catalogue of genuine 2006 Scion xB Brake Master Cylinder. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2006 Scion xB Brake Master Cylinder Parts Q&A
- Q: How to install the brake master cylinder on 2006 Scion xB?A: Installation of the brake master cylinder begins with applying lithium soap base glycol grease on two new grommets which should be installed onto the brake master cylinder followed by attaching the cap and strainer to the reservoir then locking the stopper in place while verifying that both components fit properly into their grooves. To connect the brake master cylinder to the booster apply 2 nuts and torque them to 13 Nm (127 kgf-cm, 9 ft. lbs.). Then attach the 2 brake lines to the brake master cylinder by using Special Service Tool: 09023-00101 at 15 Nm (155 kgf-cm, 11 ft. lbs.) without the tool or 14 Nm (143 kgf-cm, 10 ft. lbs.) with it using a torque wrench with a fulcrum length of 30 cm (11.81 inch). To continue the procedure of brake pedal assembly installation, first hook up the level warning light switch connector followed by sliding this clip to connect the clutch reservoir tube for manual transaxle then install the air cleaner cap sub-assembly before adding brake fluid to the reservoir. Next, perform air bleeding on the brake master cylinder and brake line and clutch line for manual transaxle. als and check the reservoir for brake fluid while inspecting for possible brake fluid leaks.