OEM 2006 Scion tC Blower Motor

2006 Scion tC Parts Questions & Experts Answers

• Q: How to remove and replace the Housing Assembly HVAC Blower Motor on 2006 Scion tC?

  A: Disconnection of the negative terminal cable on the battery through proper procedure becomes necessary before accessing the HVAC Blower Unit. This process needs to last at least 90 seconds to avoid triggering the Air Bag system along with the seat belt pretensioner potentials. As a first step remove the instrument panel sub-assembly upper followed by the instrument panel sub-assembly lower section. You should disconnect the air duct and extract the ECM and proceed to the blower assembly by unconnecting the 3 connectors while taking out the three bolts and screws to detach the claw and remove the blower. The installation process starts with blower assembly assembly incorporation of the claw after which use the bolt and 3 screws to secure it while applying 9.8 N.m (100 kgf.cm, 7 ft.lbf) of torque to the bolt followed by reconnecting the 3 connectors. Continue by placing the air duct followed by the ECM and then install the instrument panel sub-assembly lower followed by its upper section. Complete the procedure by hooking the cable to the negative battery terminal then start initialization and verify the SRS warning light.