×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2005 Toyota Tacoma Thermostat
Engine Coolant Thermostat- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Thermostat found
2005 Toyota Tacoma Thermostat
Part Number: 90916-03093$22.57 MSRP: $31.42You Save: $8.85 (29%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Engine Coolant Thermostat; Thermostat, Coolant
- Manufacturer Note: *WAX 82-95
- Part Name Code: 16331A
- Item Weight: 0.70 Pounds
- Item Dimensions: 3.4 x 2.9 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90916-03093
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2005 Toyota Tacoma Thermostat
Looking for affordable OEM 2005 Toyota Tacoma Thermostat? Explore our comprehensive catalogue of genuine 2005 Toyota Tacoma Thermostat. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2005 Toyota Tacoma Thermostat Parts Q&A
- Q: How to replace the thermostat on 2005 Toyota Tacoma?A: Draining the engine coolant should be the first step when replacing the 2TR-FE thermostat. Begin by removing the water inlet after undoing its bolt and 2 nuts before detaching the water inlet and extracting the gasket installed on the timing chain cover. After extracting the thermostat relocate it to the timing chain cover. The installation process requires you to set the jiggle valve upward on the thermostat while positioning it between 10 degrees of both sides of the recommended alignment. You should place a new gasket and the water inlet onto their positions and tighten the bolt and 2 nuts to 20 Nm (204 kgf-cm, 15 ft. lbs.). Last step is to pour the engine coolant while conducting a leak test.