How to replace the Ignition Switch or starter switch assembly on 2005 Toyota Tacoma?

The starting point for replacement of ignition or starter switch assembly involves disconnecting the cable from the negative terminal of the battery. Two screws should be removed from the LWR steering column cover before you detach its two claws. You should first disconnect the connector before unfastening the two clamps so you can pull out the ignition or starter switch assembly. The last installation step involves placing the new ignition or starter switch assembly followed by reattaching the steering column cover LWR. Complete the operation by installing the negative cable to its terminal while maintaining a torque force of 3.9 N.m (40 kgf.cm, 35 in.lbf).

OEM 2005 Toyota Tacoma Ignition Switch

Starter Ignition Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Ignition Switches found

View related parts
2005 Toyota Tacoma Position Sensor
Part Number: 84052-71010
$61.21 MSRP: $85.91
You Save: $24.70 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Un-Lock Warning; Hazard Switch; Steering Lock; Angle Sensor; Multi Purpose Switch; Lock Switch; Switch Assembly; Warning Switch; Switch
- Part Name Code: 84052
- Item Weight: 0.50 Pounds
- Item Dimensions: 13.6 x 11.6 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84052-71010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Tacoma Submodels:
- Base, Limited, Pre Runner, SR, SR5, Trail, Trail Special Edition, TRD Off-Road, TRD Pro, TRD Sport, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
2005 Toyota Tacoma Ignition Switch
Part Number: 84450-71010
$103.17 MSRP: $144.81
You Save: $41.64 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Ignition Or Starter
- Part Name Code: 84450
- Item Weight: 1.40 Pounds
- Item Dimensions: 7.4 x 5.7 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84450-71010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Tacoma Submodels:
- Base, Pre Runner, TRD Pro, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS

2005 Toyota Tacoma Ignition Switch

Looking for affordable OEM 2005 Toyota Tacoma Ignition Switch? Explore our comprehensive catalogue of genuine 2005 Toyota Tacoma Ignition Switch. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2005 Toyota Tacoma Parts Questions & Experts Answers

Q: How to replace the Ignition Switch or starter switch assembly on 2005 Toyota Tacoma?
A: The starting point for replacement of ignition or starter switch assembly involves disconnecting the cable from the negative terminal of the battery. Two screws should be removed from the LWR steering column cover before you detach its two claws. You should first disconnect the connector before unfastening the two clamps so you can pull out the ignition or starter switch assembly. The last installation step involves placing the new ignition or starter switch assembly followed by reattaching the steering column cover LWR. Complete the operation by installing the negative cable to its terminal while maintaining a torque force of 3.9 N.m (40 kgf.cm, 35 in.lbf).