Other Name: Air Bag Assembly, Instrument Panel; Instrument Panel Air Bag, Upper; Passenger Inflator Module; Air Bag Assembly, Instrument Panel Passenger W/O Door
Part Name Code: 73960A
Item Weight: 8.00 Pounds
Item Dimensions: 15.0 x 11.7 x 7.9 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 73960-AA010
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2005 Toyota Solara Submodels:
SE, SE Sport, SLE, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L GAS
2005 Toyota Solara Air Bag
Looking for affordable OEM 2005 Toyota Solara Air Bag? Explore our comprehensive catalogue of genuine 2005 Toyota Solara Air Bag. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2005 Toyota Solara Parts Questions & Experts Answers
Q: What are the crucial steps for initializing the Air Bag occupant classification ECU after a collision on 2005 Toyota Solara?
A: The occupant classification ECU initialization becomes essential after a collision under several situations that include ECU replacement and the installation of accessories together with passenger seat elimination and illumination of both SRS warning light and passenger Air Bag ON/OFF indicator light or when vehicle repair occurs following an accident. A diagnostic test for the horn button assembly must begin any repair process followed by checking for cuts and material damage and discolorations on the horn button assembly. When collision occurs without Air Bag activation, remove the horn button assy for inspection of similar damage to both components as well as any deformation of the steering wheel assy and horn button contact plate. Replacement of deformed parts is necessary. The diagnostic system for front passenger Air Bag assys should be performed while checking for damage surrounding the instrument panel for nondamaged vehicles and examining any trim damage for collided vehicles. The same diagnostics and visual inspections must be carried out on the front seat Air Bag assy in combination with the curtain shield Air Bag assy and Air Bag sensor assy center and Air Bag sensor front together with the side Air Bag sensor assy and Air Bag sensor rear. Pay special attention to all visible damage or deformation. Air Bag sensors in either front or back position should be replaced if they have deployed. A diagnostic test together with visual examinations for damage must be performed on the seat position Air Bag sensor and occupant classification ECU no matter if the Air Bags deployed. The wire harness and connectors need assessment for breaks and damage while recognizing that the SRS wire harness links with several vehicle wiring systems.