OEM 2005 Toyota Sienna Oil Filter

2005 Toyota Sienna Oil Filter Parts Questions & Experts Answers

• Q: How to replace the oil filter sub-assembly on 2005 Toyota Sienna?

  A: When changing the oil filter sub-assembly users must avoid skin contact with engine oil because it produces irritation to the skin while also containing dangerous substances. Protective clothing and gloves should be worn during handling along with skin wash procedures after contact with the engine oil. The proper disposal location exists for both used oil and filters. The oil filter replacement process starts with draining engine oil through removing both the oil filler cap and the oil drain plug and collecting the oil in a container. The clean drain plug receives a new gasket before torquing it to 45 Nm (459 kgf-cm, 33 ft. lbs.). Start by removing the oil filter through the use of Special Service Tool: 09228-07501. The first step of installation begins with cleaning the oil filter installation surface followed by applying engine oil to the new filter's gasket. After gentle screwing until the gasket touches the seat you should use the same tool to tighten the filter an extra three-fourths turn. To complete the procedure add 4.7 liters (5.0 US qts., 4.1 Imp. qts.) of fresh engine oil when performing drain and refill with oil filter change but use 4.5 liters (4.8 US qts., 4.0 Imp. qts.) without the oil filter change or employ 5.5 liters (5.8 US qts., 4.8 Imp. qts.) for dry fill operations before installing the oil filler cap and inspecting for any engine oil leakage.