OEM 2005 Toyota RAV4 ABS Control Module

2005 Toyota RAV4 ABS Control Module Parts Questions & Experts Answers

• Q: How to Service and Repair the ABS Control Module on 2005 Toyota RAV4?

  A: The first step to repair the Anti-lock Brake Hydraulic Control Assembly requires draining brake fluid followed by immediate washing of any fluid that touches painted surfaces. Special Service Tool: 09023-00101(s) is used to disconnect the brake lines by untethering 6 brake tubes from the actuator with bracket. Torque the connections to 15 Nm (155 kgf-cm, 11 ft. lbs.). After detachment create temporary markings either by tagging or keeping a written record of reconnection points. Pull the lock lever upward then disconnect the actuator connector and remove 2 bolts and nut and the actuator from the actuator with bracket while maintaining proper torque of 19 Nm (194 kgf-cm, 14 ft. lbs.). Perform this operation with care to avoid damaging brake tubes. Use a torque wrench to eliminate the 2 nuts and actuator from the actuator bracket with 5.4 Nm (55 kgf-cm, 48 in. lbs.) before removing the 2 cushion bolts and 2 cushions. To install the brake system start by following the reverse order of removal steps while checking the fluid level and looking for fluid leaks and testing the actuator with a hand-held tester.