OEM 2005 Toyota Matrix Yaw Sensor

2005 Toyota Matrix Parts Questions & Experts Answers

• Q: How to replace the Yaw Sensor on 2005 Toyota Matrix?

  A: Check that damaged Yaw Rate Sensor components are retained properly without drop usage and maintain cleanliness in the Yaw Rate sensor bracket-to-body interface. Start by removing the front seat assembly LH followed by the Yaw Rate sensor bracket which needs the bolt to be taken out. Detach the connector from the Yaw Rate sensor assembly before removing its two retaining bolts without touching the installation nuts. To install the Yaw Rate sensor assembly use two bolts which need to be torqued at 21 Nm (214 ft. lbs., 15 ft. lbs.) before connecting the connector. Reinstall the front seat assembly LH while you also refit the Yaw Rate sensor bracket by using a bolt followed by torquing the bracket to 21 Nm (214 ft. lbs., 15 ft. lbs.). Perform Yaw Rate sensor zero point calibration as one of the installation steps.