OEM 2005 Toyota Matrix Oil Filter

2005 Toyota Matrix Parts Questions & Experts Answers

• Q: How to replace the oil filter while ensuring safety and proper installation on 2005 Toyota Matrix?

  A: The procedure for changing the oil filter requires safety measures to protect your skin from oil contact since exposure should be limited due to both adverse skin reactions and dangerous chemical substances in the oil. Use protective equipment combined with gloves while cleaning your skin with soapy water or implement a waterless hand cleaner to eliminate any oil residue. All used motor oil and filters need proper disposal in locations approved by authorities. Start by taking off the engine under cover from the right-hand side before draining engine oil by removing both the oil filler cap and the oil drain plug while oil flows into a suitable container. Reinstall the oil drain plug after cleaning it and using a new gasket while torquing it to 37 Nm (377 kgf-cm, 27 ft. lbs.). The next step requires removal of the oil filter sub-assembly using Special Service Tool: 09228-06501. Clean the installation area on the oil filter before applying new engine oil to the gasket and carefully installing the filter until the gasket seals the mount. The installation of the oil filter requires Special Service Tool: 09228-06501 to secure it an additional 3/4 turn until it reaches 13 Nm (133 kgf-cm, 10 ft. lbs.) reference torque. Finish by adding new engine oil then inspect for any type of oil leak.