OEM 2005 Toyota Echo Clutch Master Cylinder

2005 Toyota Echo Parts Questions & Experts Answers

• Q: How to service and repair the Clutch Master Cylinder on 2005 Toyota Echo?

  A: You should start Clutch Master Cylinder servicing by taking off the filler cap from the reservoir then collect brake fluid with a syringe before cleaning any painted surfaces which might have brake fluid residue. Start the service by removing both the ABS actuator when present. The disconnect process of the master cylinder reservoir hose starts when moving the clip toward the reservoir then collects fluid into a container during this step. Digital tool Special Service Tool: 09023-00100 enables the removal of the clutch line from the master cylinder but always provide a container to collect the fluid. You can remove the return spring and clip using needle-nose pliers followed by removing the clevis pin through the same tool. Remove the master cylinder through two nut removal. Handle the installation step by installing the master cylinder onto its body position before torquing the two nuts to 12 Nm (120 kgf-cm, 9 ft. lbs.). Install the clevis pin along with clip and return spring into position by using needle-nose pliers. You must attach the clutch line to the master cylinder through the use of Special Service Tool: 09023-00100, while tightening it to 15 Nm (155 kgf-cm, 11 ft. lbs.). Position the reservoir hose to the inlet union and fasten it with the clip in place. The installation of ABS actuator must be carried out when the vehicle is equipped with this system. Apply brake fluid into the reservoir before completing the clutch system bleed procedure and investigate for any fluid leakage. The clutch pedal needs adjustment while filling brake fluid until reaching the maximum line and reinstalling the filler cap.