Other Name: Air Bag Assembly, Instrument Panel; Instrument Panel Air Bag, Upper; Passenger Inflator Module; Air Bag Assembly, Instrument Panel Passenger W/O Door
Replaces: 73960-06090, 73960-33050
Part Name Code: 73960A
Item Weight: 8.60 Pounds
Item Dimensions: 15.3 x 12.1 x 8.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 73960-06091
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2005 Toyota Camry Submodels:
Base, LE, SE, XLE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
2005 Toyota Camry Air Bag
Looking for affordable OEM 2005 Toyota Camry Air Bag? Explore our comprehensive catalogue of genuine 2005 Toyota Camry Air Bag. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2005 Toyota Camry Parts Questions & Experts Answers
Q: What are the crucial steps to perform after a collision regarding the occupant classification ECU and Air Bag assemblies on 2005 Toyota Camry?
A: The occupant classification ECU requires initialization in particular cases including when replacement occurs or accessories are added or when the passenger seat needs removal while both SRS warning light and passenger Air Bag ON/OFF indicator light appear or vehicle needs repair after an accident. An inspection of the horn button assembly requires two procedures: diagnostic system check and visual examination for defects. Replacement of the assembly follows if findings include cuts and cracks or discoloration. Inspect and replace the horn button assembly immediately when the vehicle experienced any collision while the Air Bag failed to deploy unless any problems interfere with the steering wheel assembly. A diagnostic check and visual defect inspection must be performed on the front passenger Air Bag assembly followed by instrument panel replacement if needed. To inspect the assembly after a non-deployment crash it should be removed and a replacement needed if defects exist. The same check and replacement protocols must be followed for front seat Air Bag assembly, curtain shield Air Bag assembly, Air Bag sensor assembly center, Air Bag front sensor, side Air Bag sensor assembly and Air Bag sensor rear but additional attention must be given to visual damage inspection. Diagnostic checks and visual damage inspections should be performed on the seat position Air Bag sensor and occupant classification ECU. Necessary replacement of components should be conducted when damage arises. Inspection of SRS wire harness connectors should be done to check for breaks and damage which guarantees the entire SRS framework linked to multiple vehicle electrical systems remains intact.