×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2005 Toyota Avalon ABS Control Module
Anti Lock Brake Control Module- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 ABS Control Modules found
Product Specifications- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Pump And Motor Assembly; ABS Control Module; Actuator Assembly
- Manufacturer Note: VSC-WITH(W/TRACTION CONTROL)
- Part Name Code: 44510
- Item Weight: 5.30 Pounds
- Item Dimensions: 9.3 x 7.9 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-07020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
- Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Pump And Motor Assembly; ABS Control Module; Actuator Assembly
- Manufacturer Note: CRUISE CONTROL-LASER RADAR CRUISE&VSC-WITH(W/TRACTION CONTROL)
- Part Name Code: 44510
- Item Weight: 5.30 Pounds
- Item Dimensions: 9.1 x 7.9 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-07030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2005 Toyota Avalon Modulator Valve
Part Number: 44050-07010$496.55 MSRP: $625.06You Save: $128.51 (21%)Product Specifications- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Pump And Motor Assembly; ABS Control Module; Actuator Assembly
- Part Name Code: 44510
- Item Weight: 5.00 Pounds
- Item Dimensions: 9.0 x 7.9 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-07010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2005 Toyota Avalon ABS Control Module
Looking for affordable OEM 2005 Toyota Avalon ABS Control Module? Explore our comprehensive catalogue of genuine 2005 Toyota Avalon ABS Control Module. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2005 Toyota Avalon ABS Control Module Parts Q&A
- Q: How to replace the ABS Control Module in the Brake Actuator Assembly (W/O VSC) on 2005 Toyota Avalon?A: The first step before Brake Actuator Assembly (W/O VSC) replacement requires draining brake fluid then immediately wiping away any fluid that sticks to painted areas. Start by removing the negative battery cable. You can then remove the brake actuator bracket through this process: disconnect its connector latch and use Special Service Tool: 09023-00101 to detach six brake tubes from the actuator while recording reconnect positions. The brake actuator with its bracket can be detached by removing three bolts while avoiding damage to brake tubes and wire harnesses. You should first remove the two nuts which will detach the brake actuator from its bracket holder. The installation method requires users to install the brake actuator on the bracket with 2 tighteners that need to be torqued to 8.0 Nm (82 kgf-cm, 71 inch lbs.) followed by attaching the brake actuator with bracket using 3 bolts at 19 Nm (194 kgf-cm, 14 ft. lbs.) but maintaining consistent brake tubes and wire harness integrity. Use Special Service Tool: 09023-00101 to properly position each brake line on the brake actuator before torquing to 15 Nm (155 kgf-cm, 11 ft. lbs.). Finally, reconnect the brake actuator connector. Use Special Service Tool: 09023-00101 to bleed the master cylinder followed by the brake line while inspecting for leakage and verifying the reservoir fluid level. After reconnecting the cable to the negative battery terminal owners should perform initialization steps when needed before using a hand-held tester to check the brake actuator.