How to replace the Camshaft Position Sensor on 2005 Scion xA?

One should remove the air cleaner assembly before substituting the Camshaft Position Sensor. After disconnecting the camshaft position sensor connector you can proceed to remove its bolt and sensor. Users should apply engine oil to the O-ring before installing the new sensor by placing it on the bolt with a torque setting of 8.0 N.m (82 kgf.cm, 71 in.lbf). After this reinstall along with replacing the air cleaner assembly.

OEM 2005 Scion xA Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Camshaft Position Sensor found

View related parts
2005 Scion xA Camshaft Position Sensor
Part Number: 90919-05024
$116.24 MSRP: $163.16
You Save: $46.92 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Cam Position; Engine Camshaft Position Sensor; Cam Position Sensor; Camshaft Sensor; Cam Sensor
- Replaces: 19300-BZ020
- Part Name Code: 11101E
- Item Weight: 0.50 Pounds
- Item Dimensions: 13.4 x 11.2 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90919-05024
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Scion xA Submodels:
- Base | 4 Cyl 1.5 L GAS

2005 Scion xA Camshaft Position Sensor

Looking for affordable OEM 2005 Scion xA Camshaft Position Sensor? Explore our comprehensive catalogue of genuine 2005 Scion xA Camshaft Position Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2005 Scion xA Camshaft Position Sensor Parts Q&A

Q: How to replace the Camshaft Position Sensor on 2005 Scion xA?
A: One should remove the air cleaner assembly before substituting the Camshaft Position Sensor. After disconnecting the camshaft position sensor connector you can proceed to remove its bolt and sensor. Users should apply engine oil to the O-ring before installing the new sensor by placing it on the bolt with a torque setting of 8.0 N.m (82 kgf.cm, 71 in.lbf). After this reinstall along with replacing the air cleaner assembly.

Alternate Year Models

2004 Scion xA Camshaft Position Sensor 2006 Scion xA Camshaft Position Sensor