OEM 2004 Toyota Sienna Steering Angle Sensor

2004 Toyota Sienna Parts Questions & Experts Answers

• Q: How to replace the steering angle sensor on 2004 Toyota Sienna?

  A: Begin replacement of the steering angle sensor by observing safety precautions from the restraint system and then disconnecting the battery terminal. Your installation process begins by checking that the front wheels are parallel to the vehicle position and continuing with the removal of horn button assembly and steering wheel assembly and steering column lower cover. You should start by taking off the spiral cable sub-assembly followed by removing the steering sensor through claw fitting disconnection. Implement the new steering sensor onto the spiral cable using the method which consists of maintaining the front wheels pointed in a straight forward direction. After installation of the steering column lower cover and spiral cable sub-assembly the installer should center the spiral cable before putting back the steering wheel assembly. Finish the task by checking the wheel center point followed by horn button assembly installation and a warning light inspection round.